Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Quilt frame and a front

Posts

Quilt frame and a front

#1

JL

Quilt frame and a front

JL

I've been asked to build a quilt frame that will reside in the Middle/High School building. The auditorium and the cafeteria are nearby.

They want the quilt to be enclosed and the frame to have a transparent front.

I tried selling them on glass, but they have concerns w/ it (even if it is tempered). So they want "plastic".

I can get sheet acrylic or polycarbonate in the correct size.

I was thinking about using 3/16" as it is a bit more rigid and less flexible.

I am leaning towards polycarbonate as it is a bit tougher and less likely to yellow upon exposure to UV light. The frame won't be in direct sunlight, but it may catch some reflected light.

Thoughts?

Re: Quilt frame and a front

#2

Re: Plastic

Mark Mandell - Gone Round In New Jersey

The softer poly-carb is more durable to impact but it scratches pretty easily. Acrylic has a harder surface and is unlikely to have to withstand a significant impact, way cheaper as well.

Re: Quilt frame and a front

#3

JL

Cheaper - not significantly

JL

I would be purchasing a 8' x 6' sheet (cut to size).

Acrylic would be $350.

Poly-carbonate would be $375.

Re: Quilt frame and a front

#4

A Pitence

Mark Mandell - Gone Round In New Jersey

So that some frosh bouncing off the walls in the middle of a sugar rush doesn't do irreparable damage, I'd go with the Lexan ;)

Re: Quilt frame and a front

#5

Re: Quilt frame and a front

Yonak

Did you say Middle School ? Use plywood.

Re: Quilt frame and a front

#6

Re: Quilt frame and a front

Barry Irby

Many years ago (40?) I built a trophy cabinet for the local school. I used laminated windshield type safety glass for the front. I had completely forgotten the case. I saw it a few years ago and had a flashback. The glass held up better than the rest of it. It was expensive and heavy.

Re: Quilt frame and a front

#7

Re: Quilt frame and a front

William Duffield

I would be wary of using plexiglas. I have four panels of it in a screen door off my porch. The first time my dog tried to go through it, she put two cracks in it, in a "Y" pattern. Later, a squirrel got onto the porch, through another security breach. When the dog went after it, it tried to run out through the same panel. It successfully executed a Roger Rabbet escape, breaking out a squirrel sized piece of the cracked plastic by running headlong into it.


Most of them don't get out alive. This one ended up with nothing more than a really bad headache.