Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

string thing "what is it"

Posts

string thing "what is it"

#1

string thing "what is it"

Grant in Iowa

I am often asked to identify primitives here at the National Czech & Slovak Museum & Library where I work. This item has me stymied.

I *think* I know what it is, but will withhold my input until you have spoken to prevent coloring the answer(s).

Story goes that it was found in an attic during an estate cleanout. It appears well used and there are two wooden slides that fit over the left and right edges (only one is shown on the right side in the photo). Two rolls of twine were on the dowels (not visible) at top when it was found, and routed through the thumbscrew tension control mechanism at top center. A bent nail atop the dowel protruding from the bottom indicates to me that something else was affixed to the bottom.

It appears either craftsman, or commercially made. It doesn't have a crude feel to it at all.

So what is it?


Re: string thing "what is it"

#2

Re: string thing "what is it"

John Veerkamp

It is used to ply two strands to make thicker "string" Similar to what a spinner does on a spinning wheel to ply yarn to make it thicker and stronger, That may even be a coarse yarn in the two "balls" above the device. If it had three hooks, it would be a rope maker.

Re: string thing "what is it"

#3

Re: string thing "what is it"

Rum

Disagree that its a rope maker, at least not for twisting because you'd need some way of adding twist to the twine to make it ply properly and I'm not seeing how this would do that.

With a spinning wheel you over twist a little before plying and that wouldn't work really well in balls like that because they'd self twist (you can "soft lay" by not overtwisting the strands as well, but I've still never seen anything like this for yarn.. an

With twine you'd need to twist it harder than yarn even otherwise you'll loose all of the twist in the base ply's. You can see a picture of a rope machine here:

https://en.wikipedia.org/wiki/Rope#Laid_or_twisted_rope

You have to keep adding twise as you ply otherwise you end up completely untwisting the base strands. I'm intimiately familiar with those having spent a non trivial part of my childhood behind one while dad worked the other end making horse hair ropes.

Here are some other cord makers: http://www.louisefrench.com/making_cords_for_ply-splitting.htm

I do admit to being stymied as to what this is though, I could see it being somehow used for some sort of interweaving between (two strand warp weaving essentially) but I can't imagine what the use case would be...

Re: string thing "what is it"

#4

Clint Searl

Re: string thing "what is it"

Clint Searl

Obviously intended for use in some kinky activity.

Re: string thing "what is it"

#5

ebd

Re: string thing "what is it"

ebd

Doofus response to a serious inquiry. Grow up.

Re: string thing "what is it"

#6

So

Mark Mandell - Gone Round In New Jersey

before we take ( or mistake) ourselves too seriously

does anybody here actually know what this thing is?

Re: string thing "what is it"

#7

Re: So

William Duffield

I have no clue. I would guess it is for bundling up a bunch of loose somethings. It is obviously craftsman made, but not heavily used, so there is a possibility it didn't work too well, or whoever it was invented and made for didn't understand it. (Been there; done that :D )

Re: string thing "what is it"

#8

Re: string thing "what is it"

Stuart Johnson

Send a photo into Lee Valley and see if it's something they can identify. They have all sort of strange stuff show up in their new letter.

Re: string thing "what is it"

#9

some sort of packaging aid.

Keith Newton

Back, not so many years ago, before plastic packaging tape, and lots of other packaging materials, stores and small manufactures would box or bundle their products, held together with twine.

My first business in the late sixties was a leather shop. I would go over to Tulsa to buy several months worth of sides from Mid-Continent Leather. They would roll it up in craft paper, then tightly bind it using a trucker's hitch. I inquired about the knot. One old timer informed me that it was call a wagoner's hitch when he learned to use it.

I'm guessing that someone had a standard package size that needed to be wrapped tightly before shipping, and this was used to speed the process.

Re: string thing "what is it"

#10

Re: some sort of packaging aid.

Rum

Sounds reasonable in theory..

How would you use the sliding sides for this?

Re: string thing "what is it"

#11

Re: string thing "what is it"

R. Payne

My guess is an improved variant of a lucet (sp?) for cord work.

Re: string thing "what is it"

#12

Re: some sort of packaging aid.

Joseph Mulherin, sr

Seems to me that the sliding edge would hold the package from unwinding while the two ends of the string were wrapped around the package and tied.

Re: string thing "what is it"

#13

So....great fun....but

Brian Roberts

What is it....

Re: string thing "what is it"

#14

Thought I knew, now I am not sure at all...

Grant in Iowa

I examined it and was pretty sure I had seen my sister making macrame plant hangers with a plastic version back in the seventies. The more I think about it, the less I am sure, especially since she doesn't recall such a device (sigh).

So in the end I am not sure we really know what it was for.

Color me stumped.

Regards,

Grant in Iowa

Re: string thing "what is it"

#15

Re: So....great fun....but

John McGaw

Well, double dispensers are not unknown. If you google for "antique double twine dispenser" and look at the images you will see some cast iron versions that might be related. Yours might just be something someone knocked together after seeing one of the other sort in the local general store.