mechanism for a reclining Morris Chair
Mike Van Pelt
looking for a source of a mechanism for a reclining morris chair. Any one have a source?
thanks
Mike
Knowledge You Can Build On — Est. 1998
mechanism for a reclining Morris Chair
Mike Van Pelt
looking for a source of a mechanism for a reclining morris chair. Any one have a source?
thanks
Mike
Re: mechanism for a reclining Morris Chair
Mark Mandell - Gone Round In New Jersey
Find someone with a very used Lazy Boy, give'em $10, and rip the guts out. Tried otherwise years ago and quit as the only place that would sell one (don't remember where/who) wanted more than buying a damn chair! Friend offered me one from a L-B couch he was putting "on the curb". Worked just fine.
That said, your other option is to actually go "curb shopping". 
Re: mechanism for a reclining Morris Chair
Mike Van Pelt
Yes thank-you I had thought of that. However I am wanting to build several of these chairs and wanted to find a relieable source of new clean mechanisms. Most "dumpster" chairs, the reason they are on the curb because of a mechanism failure. The Amish build this chair so there has to be a supply somewhere?
thanks
Mike
Re: mechanism for a reclining Morris Chair
Joseph Mulherin, sr
If you know of an Amish settlement just go and ask them.
what is a reclining Morris chair?
Jerry Gibbs
I have a traditional Morris chair. The back reclines by tilting on a simple pivot. It was the original "recliner". Curious what you are talking about. Jerry
Re: mechanism for a reclining Morris Chair
markhennebury
This is the way that i made them, no hardware just a pin.

Re: mechanism for a reclining Morris Chair
mike van pelt
Thanks all for some great suggestions.
The Amish are a little "closed mouth" when asking for a source that might be looked upon to be competion. I do not believe they would share that with the English. However I am going to try.
I am looking for the mechanism that would allow the chair to layback but also bring up the foot board, just like a Lazy Boy. I have seen them in a large Amish catalog.
Great picture...nice work. I build a bowed arm and steam bend the arms. My chair appreared in Woodworkers Journal and even made the cover!
thanks
Mike
Re: mechanism for a reclining Morris Chair *LINK*
John in NM
I doubt you will find much made specifically for a Morris style chair.
If I wanted to make such a thing, I would contact a supplier such as the one in the link and find out what it takes to buy their stuff, probably they have a minimum contract. I would imagine that others making these chairs are sourcing hardware similarly.
They have other mechanisms, I just picked one that seemed appropriate.
Recliner hardware
Re: mechanism for a reclining Morris Chair
mike vanpelt
thanks I will follow that lead!
Mike
I think this is what you need *LINK*
Dick Coers
A high leg, 3 way mechanism. We have a morris style recliner, can't even remember where we bought it. The leg rest has to kick completely under, so you need the 3 way.
http://www.rakuten.com/prod/replacement-3-way-push-back-style-recliner-mech-mechanism-set/265572505.html?listingId=340619014&sclid=pla_google_Recliner-Handles&adid=29963&gclid=CKj2iZuG3MYCFQiTaQod2y4K7Q