Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

made a miter sled

Posts

made a miter sled

#1

made a miter sled

Bill Tindall, E.Tn.


I have never had a good time of cutting miters. Faced with making a bunch for the spice box molding and a picture frame for granddaughters art work I dashed one together from the recommendations here at WC. It works grand.

The back bolt hole for each leg is drilled oversized, the front hole is snug. I cut two miters on the left side then test fit to see if it was 90 degrees. I empirically adjusted the leg to get perfect 90 degrees miter then locked it down. Repeated for right leg.

Re: made a miter sled

#2

Re: made a miter sled

Barry Irby

I like it. Looks well done. Especially like the blade guard built in. So easy to forget about the blade and having it appear "out of nowhere". Would anonther one be good on the "far" side?

I know its part of the geometry of the thing, but is it important to have it so deep, back to front? I know you are about my height. Do you have to lean far forward to see or is it about right?

Thinking about some hold-fasts?

Re: made a miter sled

#3

Re: made a miter sled

Bill Tindall, E.Tn.

Do you have to lean far forward to see or is it about right? I am a puny 5'7" and it is not inconvenient to use.

Thinking about some hold-fasts? No, I have 5 on each hand......still :)