Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

RO Sander accessory

Posts

RO Sander accessory

#1

RO Sander accessory

Tom

No sure what they are called but it is basically a "dish" that you can set the sand on and it will spin while the sander winds down. Saves waiting for it to stop and then put it down.

Since I am making a new rolling vac stand for my sander I would like to see about this item.

Thanks!

Re: RO Sander accessory

#3

Re: RO Sander accessory  *LINK*


Sander Sitter

Re: RO Sander accessory

#4

Re: RO Sander accessory

Barry Irby

I have the Sander Sitter noted above. The crepe rubber in it is supposed to clean the sand paper while it spends down. I'm not sure that part does much. I seldom use it. I guess I don't have confidence I can just throw the sander in it and turn loose of it. I generally lay it on its side.

Re: RO Sander accessory

#5

Re: RO Sander accessory

Bill Tindall, E.Tn.

Would not a piece of upholstery foam work?

Re: RO Sander accessory

#6

Re: RO Sander accessory

Barry Irby

I will give that a try, but I think the sander will run around like a cat chasing its tail. The sanding sitter has what passes for a bearing and lets the tray spin.

Re: RO Sander accessory

#7

Yes, and....

David Yoho

For small tasks where there isn't enough weight to keep the part being sanded from dancing around the bench top, I use a piece of carpet padding. Usually I just sit the sander down on the foam padding while it comes to a stop. Works good enough.

Re: RO Sander accessory

#8

I stop it with my hand.


Re: RO Sander accessory

#10

Re: RO Sander accessory

AZ in Colorado Springs

I lay out a piece of sand paper with the abrasive facing up (velcro side down) and set it on that.