Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Solvent for WD-40 Specialist Corrosion Inhibitor

Posts

Solvent for WD-40 Specialist Corrosion Inhibitor

#1

Solvent for WD-40 Specialist Corrosion Inhibitor

mdclor

I used this on the tables of various machines when moving to hot, humid Virginia. It has worked great so far, but now I am reassembling the machines and want to remove it because it is quite sticky. The Safety Data Sheet indicates that the primary ingredient is "Distillates (Petroleum), hydrotreated heavy naphthenic".

Would mineral spirits remove this or is there a better item to try? Thanks.

Re: Solvent for WD-40 Specialist Corrosion Inhibitor

#2

mineral spirits yes

Bill Tindall, E.Tn.

Actually anything will work except alcohol which probably won't work well.

"hydrotreated heavy naphthenic". " I have no idea what this means but anything refined from petroleum will dissolve and in anything else derived from petroleum. - mineral spirits, naptha, xylene, toluene etc.

Re: Solvent for WD-40 Specialist Corrosion Inhibitor

#3

Re: mineral spirits yes

mdclor

Thanks, Bill, if naphtha will work, that might be a better choice than mineral spirits because it will leave virtually no residue like the MS. Do you agree?

Re: Solvent for WD-40 Specialist Corrosion Inhibitor

#4

Re: mineral spirits yes

Bill Tindall, E.Tn.

These things are all distillation fractions meaning they are 100% volatile. Naptha is a lower boiling fraction than mineral spirits so it will go away faster, for better or worse.

Re: Solvent for WD-40 Specialist Corrosion Inhibitor

#5

Thank you!