Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Refinish Adirondack Chairs

Posts

Refinish Adirondack Chairs

#1

Dennis in Southern Oregon

Refinish Adirondack Chairs

Dennis in Southern Oregon

I have a couple of older, previously unfinished, pine chairs that sit in a shaded dry area of a porch. They have begun to silver and weather a bit. I thought I might gussy them up a bit by sanding them and applying a non-opaque finish. Any recommendations for a finish? Poly varnish, deck finish? I don't care much one way or the other about changing color. I mainly want to give the chairs some protection and keep them from transferring dust and splinters to the users.

Re: Refinish Adirondack Chairs

#2

Kneale Brownson

Re: Refinish Adirondack Chairs

Kneale Brownson

I've used enamel sign painter paint to paint pine that has sat outside for maybe 20 years without failing.

Re: Refinish Adirondack Chairs

#3

Re: Refinish Adirondack Chairs

Dick Coers

My old go to paint guy used to say, "Once pine oxidized, almost no paint would stick. Well it might stick, but not for long." So prep is going to be more important than the finish. I've never done something like that, but I'm thinking there must be some kind of prep with bleach in it to kill all the mildew and mold.

Re: Refinish Adirondack Chairs

#4

Re: Refinish Adirondack Chairs

George Koch

I would go for a good semi transparent deck stain, something like Cabots.

Re: Refinish Adirondack Chairs

#5

Re: Refinish Adirondack Chairs *LINK*

Jim Dillon

Dennis, I've had good luck with Sikkens Cetol 1 semi-transparent stain (used alone). In fact, right now I am redoing the top of a cypress umbrella table that I built from cypress 15 years ago (along with two Adirondack chairs and a garden bench). The Sikkens line of products are expensive, and only come in gallon amounts AFAIK. Amazingly, I stored a pint or so in a glass jar 15 years ago and it is still good and didn't need restirring although I did. It goes on easily, even in hot weather and flows out nicely.

A good source of exterior finishes for wood (including Sikkens) is Schroeder Log Home Supply. They offer a variety of brands and will send you samples to test. For a deck finish (and exterior log walls), I've had excellent luck with the Weatherseal line of products but they don't offer the gloss of the Sikkens product which builds with each coat. Good luck. Jim


Schroeder Log Home Supply