Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Folding portable tablesaw

Posts

Folding portable tablesaw

#1

Kneale Brownson

Folding portable tablesaw

Kneale Brownson

I find myself in need of a tablesaw that can be "put away" into a smaller space than the cabinet and contractor saws in my far-distant barn.

I would like it to be compact when in non-use mode, easily moved about when preparing for use and as accurate and steady as possible given these parameters.

What are the experiences among WC folks?

Re: Folding portable tablesaw

#2

Re: Folding portable tablesaw

Doug Turner

I have had a Bosch 4000 for several years and I prefer it over a Delta contractor saw. The Bosch has plenty of power to rip 2" maple if you don't force it. The fence is accurate, the table expands for longer cuts, the newer models have the european type anti kickback splitter, and the folding table is a dream to operate. There are plans on the router form for a router insert in the expandable table if you are pressed for space. There is an optional rear extension table.

Downsides:1) the table is aluminum and scratches easily, but it hasn't effected accuracy. Dust collection works somewhat but could be improved.

Doug Turner

Re: Folding portable tablesaw

#3

Re: Folding portable tablesaw

Rum

No suggestions but another question

- are there any of the folding saws made now that have a standard miter slot (or even a decent but non standard miter slot)? I friend was looking at them and my suggestion was to just not use the miter guage on most of them if you could avoid it and get a miter saw (he wasn't exceptionally happy with that advice).

Re: Folding portable tablesaw

#4

Re: Folding portable tablesaw

William Duffield

Both Bosch and SawStop have jobsite saws with flesh detecting technology that will prevent serious injuries due to hands contacting the blade. I don't know whether the Bosch GTS1041A REAXX is available for purchase yet, but it should soon be available. I haven't used either of these saws, so I don't know how well they perform, nor their selling price. I also don't have any data on injury reduction performance of the Bosch saw.

Re: Folding portable tablesaw

#5

Re: Folding portable tablesaw

RK near Boston

Bosch 4000 has standard miter slot. I have used it with incra miter express and it works ok.

Dust collection is so so, I only use it outside.

Re: Folding portable tablesaw

#6

Re: Folding portable tablesaw

Rum

I didn't think the 4000 did, but I see the 4100 does for sure. Good to know, thanks!

Re: Folding portable tablesaw

#7

Re: Folding portable tablesaw

Jerry Gibbs

I have a 10" Ryobi with a folding stand. I like the saw and it stores compactly. It is also relatively inexpensive. The fence is surprisingly accurate, although I check it. There are two features I do not like. The miter slots are smaller than standard and have tabs at the top, apparently to keep the cheap miter gauge from falling out. Since the gauge is sloppy (I never expected much) I made a cut-off sled. Trying to make runners to fit those odd slots proved too difficult. I cut the tabs off. The other problem is the blade insert. It is stamped sheet steel of an odd configuration. I found it impossible to replace it with a solid insert for zero clearance. I use a large piece of plastic laminate covering the blade slot to provide the zero clearance. The laminate piece is large so it can be clamped on the end, a perfect use for the laminate you saved but don't know what to do with.

I would buy this saw again. It is used at our FL trailer and space is an issue. The saw cuts well and stores easily, along with the folding stand. I never tried dust collection. Given that dust collection on a full size saw with a real dust collector is difficult, I wonder how successful you would be. Jerry

Re: Folding portable tablesaw

#8

Re: Folding portable tablesaw

Mark P

I have had the Bosch 4100 for a while. It has plenty of power and makes repeatable cuts. It is really portable and fits in a 1 1/2 by 3' footprint when folded.

I would buy it again.

Re: Folding portable tablesaw

#9

Kneale Brownson

Re: Folding portable tablesaw

Kneale Brownson

After a lot of Internet time and finally going to look at a bunch, I got the Bosch. I particularly liked the way the stand stores the complete saw in a relatively small footprint for my limited space, rolled and changes orientation easily and is quite sturdy. Thanks for the information.