Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Sawstop Saga Conclusion

Posts

Sawstop Saga Conclusion

#1

Sawstop Saga Conclusion

Thomas Skaggs, Foothills of Mount Level

Folks,

I would like to thank this woodworking community for the feedback, even the contrary views. My intent was solely to seek the wisdom here and not be critical of Sawstop. So if any of the information was construed as criticism of the company or their products overall, then let me set the record straight. I have never been poorly treated by Sawstop as I worked with them to resolve the issues. In fact, their tech folks have been great. If I worded things poorly, I apologize to Sawstop for that.

The representative from Sawstop and the local vendor came to my shop today. The SS Rep. was genuinely interested in what I had to say. The update I have is that a solution was reached that satisfied my concerns.

In fairness to Sawstop, I think that is all that needs to be said.

I will only share one last thought...Sawstop, as a company, showed me respect. I was not asked to say anything. I just felt I should do right by Sawstop as they have done right by me.

Thanks to all here for your support!!

T.

Re: Sawstop Saga Conclusion

#2

Re: Sawstop Saga Conclusion

Bill Howatt

Glad your concerns are addressed and thanks for letting us know.

Bill

Re: Sawstop Saga Conclusion

#3

Glad to hear it

John in NM

As long as you're happy with the fix, and the fix is an actual fix, then this is nothing but good :D

Re: Sawstop Saga Conclusion

#4

Re: Sawstop Saga Conclusion

Larry

Glad that Sawstop did right by you!

Re: Sawstop Saga Conclusion

#5

Re: Sawstop Saga Conclusion

mdclor

I'm glad to hear that the issues are resolved because the previous thread was about the nastiest thread I have ever seen on WoodCentral.

Re: Sawstop Saga Conclusion

#6

Re: Sawstop Saga Conclusion

Chuck in Mtl.

Will you tell us what the final resolution to the problem was? Would be interesting for future users of this brand of saw.

Re: Sawstop Saga Conclusion

#7

Excellent!

Jim Dillon

Thomas, if you're happy with the response from Sawstop, then that is all that matters. Thanks for letting us know. Jim

Re: Sawstop Saga Conclusion

#8

Re: Sawstop Saga Conclusion

paul in AZ

With all the heat generated by the last thread it would be good if you at least told us what the troubles with the machine were.

Re: Sawstop Saga Conclusion

#9

Glad to hear it and a Question......

Barry Irby

Mentally, I am in the market for a Sawstop TS. Financially, I am not there yet, but its on my list.

The previous thread was disturbing to me and caused me to wonder about the wisdom of buying the saw.

The question? Now that you have had the experience you have had and finally gotten the problem resolved to your satisfaction, woudl you buy a Sawstop again?

Re: Sawstop Saga Conclusion

#10

Re: Sawstop Saga Conclusion

walta

I understand you do not want to disclose nature of the fault publicly.

As someone who repairs machines let me say, intermittent problems with symptoms that will not present themselves when the technicians are present are the difficult if not imposable to diagnose accurately.

Was the Sawstop rep able to reproduce your symptom?

Was the Sawstop rep able to locate something that was clearly a fault?

I think we all agree if your saw is fixed that is the best resolution for all parties.

Walta

Re: Sawstop Saga Conclusion

#11

Answer for Barry et al

Thomas Skaggs, Foothills of Mount Level

Barry,

When you have your money together, buy the Sawstop. I am satisfied that the safety features of the saw work. Beyond that, the saw is very well made. It will serve you well.

As for specifics with Sawstop's resolution of my issues, because I am not an engineer, I am not qualified to expound on the technicals. But for the record, Sawstop addressed all of my concerns to my satisfaction. Good on them.

Henceforth, I will resume my typical posts regarding woodworking, and general wisecracks. :D

Those here who have known me for a long time know that I'm not much for kicking up the dust. That was not my intention with this matter. This is a terrific community for sharing information, ideas and problems. Perhaps this time I crossed the line. Ellis would have been within good reason to give me a yellow card. Sorry for any hackles raised!

T.

Re: Sawstop Saga Conclusion

#12

Re: Answer for Barry et al

Jim Dillon

Thomas, I think you are being too hard on yourself. Your OP, IMO, was well presented and I thought described your recurring problems very well. You reached out and sought opinions from others. The WC community responded, for better or worse.. If I had spent that much money on a TS (or any product), and it didn't meet my expectations, I would be upset as well. I'm glad you were able to reach a satisfactory conclusion with this. Jim

Re: Sawstop Saga Conclusion

#13

Re: Answer for Barry et al

Barry Irby

Thank you for the answer. Perhaps in a few months, if I get the money together and screw up my courage to the sticking point, I will ask again to be certain the repairs "took" before I plunk down the cash.

I need a new TS like a hole in the head, but I really like my fingers.

Re: Sawstop Saga Conclusion

#14

Just saw a shorter thumb tonight at our club

Dick Coers

A guy came to our woodturning club tonight with a shorter thumb. He sawed the tip off on his table saw, at some distance down the nail. He pushed the piece through the saw with a push stick, reached for the piece, and clipped his thumb while reaching. Looked pretty tough!

Re: Sawstop Saga Conclusion

#15

Re: Just saw a shorter thumb tonight at our club

TomD

Very regrettable. But it can happen with SS, according to their warranty page, and it probably can't happen with either proper technique, or a well designed guard. SS is a private corporation that has a very interesting product. But just to say it isn't as thought there is pre-war Delta tech, or sawstop. In the EU, and maybe in places like Japan, a huge amount of development work has gone into making safer saws. Unfortunately unlike when the imports forced the US car makers to up their game, there seems to be little pressure to make anything sensible, in this market.

Re: Sawstop Saga Conclusion

#16

Re: Answer for Barry et al

Chuck in Mtl.

Could you give us a run down on the resolution in laymen terms? I will be very interested to know what was down to get the saw working again. Inquiring minds want to know.

Re: Sawstop Saga Conclusion

#17

Hey Barry, I learned a new TS method last week,

Keith Newton

that had me pause to watch, then shake my head before going on.

A couple of Dryvit guys had a cheap little TS without a base, just sitting on the garage slab, with nothing behind to catch the material. As they fed a sheet of 1/2" OSB over it, when it got to the tipping point, the saw would flip up onto it's back corner, letting the concrete garage floor act as the out-feed table. When the panel passed the blade, they just let the saw drop back down flat on it's base. I'll have to admit that they were pretty good at managing it. For them, that was all they needed. Why bother with legs or catch table? ha

Re: Sawstop Saga Conclusion

#18

Re: Glad to hear it and a Question......

Hank Knight

Barry,

I have been following this thread and Thomas's original post with great interest. I have owned a SawStop industrial cabinet saw for several years. My previous saw was a Delta Unisaw. As Thomas says, the SawStop is a fine machine. I like it better than my Uni, but I've never had any trouble with it. It worked great out of the box. I'm very happy to hear that Thomas has reached a satisfactory resolution with SawStop, especially given his obvious anguish expressed in his OP. I think his response to your question about buying a SawStop, in light of his experience, says it all.

Hank

Re: Sawstop Saga Conclusion

#19

Re: Hey Barry, I learned a new TS method last week

Barry Irby

Having been a home builder years ago I have seen some pretty crazy things. Never seen a TS used as you describe, but I woudl be waiting for it to run all over creation.

I had an accident with my RAS about fifty years ago. I was tapering table legs on it. (Really, it was the only tool I had at the time and I tapered table legs with it.) I pushed the leg through and reached for it between the motor and the column. Managed to touch my thumb on the blade pretty much in the middle of the nail. The doctor wanted to take the first joint off. I woudl have no part of that. He put a couple of stitches in it, saying it was so mangled there wasn't much left to stitch, and bandaged it. It was painful but healed. The nail grew back but about a 1/4 of it is not Attached. Took a year or more for it to return to nearly normal. Almost fifty years later I am truly grateful I did not allow the doctor to amputate my thumb to the first joint.

So, have nearly cut off a thumb, I am interested in the Sawstop technology. (I know it was RAS that got me, but just because you can't reduce All risks does not mean you should reduce some of them.

Re: Sawstop Saga Conclusion

#20

Re: Sawstop Saga Conclusion

BrianMonumentCO

Mr Skaggs,

I am glad that you got resolution that you happy with.

I have never been against you getting satisfaction.

But as a potential buyer of such a saw, I am curious as to the actual resolution of the problems.

Are you keeping your saw?

If you are keeping the saw did the technician make adjustments to the saw?

and what made it acceptable?

Re: Sawstop Saga Conclusion

#21

Kneale Brownson

Maybe the resolution required no disclosure