Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Roto-Carve

Posts

Roto-Carve

#1

Roto-Carve

Stan Proctor

I just got a Roto-Carve machine with some other stuff I bought and have never seen one before. I think I'm going to clean it up a bit and put it up for sale. I am unsure what to ask for it...if anybody has some info they could share with me, I'd appreciate it.

Thanks.

Re: Roto-Carve

#2

Re: Roto-Carve

Larry

photo?

Re: Roto-Carve

#3

Re: Roto-Carve *LINK*

John in NM

A friend of mine has one, but he's usually out of email range during the summer. I'm not sure he's used his, but the old thread from WC below has at least one guy singing the accessory's praises.

These are pretty unusual tools these days, I believe production was very small run. From the little I've seen, $500 or so would probably move it pretty quick, $750 less quick. Of course the biggest hurdle seems to be finding a willing buyer who actually knows what one is :D


http://www.woodcentral.com/woodworking/forum/looking.pl/md/read/id/3604/sbj/roto-carve-contour-shaper/

Re: Roto-Carve

#4

Re: Roto-Carve

Stan Proctor

I just took a few, but posting them seems easier said than done.

Re: Roto-Carve

#5

Re: Roto-Carve

Stan Proctor

Thanks.