Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Minwax Water Acrylic Finish

Posts

Minwax Water Acrylic Finish

#1

Minwax Water Acrylic Finish

Thomas Skaggs, Foothills of Mount Level

So I was making some replacement doors for cabinets in our kitchen. I went to the store to pick up a quart of finish. It was only 3 doors so I thought I'd just spray some poly and be done with it.

But a can of Minwax water soluble semi-gloss acrylic finish caught my eye. I read the can and it sounded like worth a try. So I sprayed the doors with the stuff, straight from the can. After two applications (rub down between) the finish was smooth and clear. It looked great.

Okay, so am I missing something here? There must be a downside to this finish. But what is it? Anybody know much about this type of finish? Anyone using it on fine furniture?

TIA

T.

Re: Minwax Water Acrylic Finish

#2

Re: Minwax Water Acrylic Finish

Howard Acheson

That Minwax finish has been around for a long time. I've used it frequently for quick and dirty job. It all ways worked well.

Re: Minwax Water Acrylic Finish

#3

Re: Minwax Water Acrylic Finish

Dick Coers

I just have a thing about not buying my finish at the same place I go to get my lawn fertilizer. I either buy Sherwin Williams or General Finishes.

Re: Minwax Water Acrylic Finish

#4

Re: Minwax Water Acrylic Finish

Alex Grigoriev

Acrylic finish is not very durable. Alcohol will soften it, and I suspect grease will eat on it, too.

Re: Minwax Water Acrylic Finish

#5

some information

Bill Tindall, E.Tn.

1. It is acrylic so it will be as resistant to yellowing as it gets. Great for maple and ash. Some would say not ideal for walnut, oak and cherry. If you are looking for "water white" this is a good product to achieve it.

2. That particular finish may not be up to the task of kitchen cabinetry finish. It was say on the can if it is sanctioned by the Kitchen Cabinet Association (or what ever the organization is called.)

3. I have yet to see a water based finish that has the clarity of a solvent based finish. They lack clarity because the dispersed balls of film former don't fully coalesce into a film. The interfaces scatter light resulting in more or less lack of "depth". (these finishes are not water soluble. The film former is dispersed in water)

Re: Minwax Water Acrylic Finish

#6

That's why I post here

Thomas Skaggs, Foothills of Mount Level

Once again, great info from the Wood Central community. Thanks!

The cabinet doors I finished with it are far enough away from the grease and cleaners etc. So I think they will be okay.

My favored finished for furniture is lacquer. For table tops I like Kemvar. I get both from Sherwin Williams.

Appreciate the feedback!!

T.