Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

cocobolo lumber

Posts

cocobolo lumber

#1

cocobolo lumber

Lisa

I am new to this site and wanted to know if someone could help to point me in the right direction.

I have acquired an amount of cocobolo lumber. I don't have much knowledge about the wood except what I have read online and learned in the past couple of months. I believe the wood is originally from Costa Rica and it has been stored for at least 5 years - probably more. Most pieces are approximately 7' x 8" x 2". Some bigger, some smaller. I was originally going to sell it one piece at a time and have actually sold a couple of pieces. If anyone could maybe suggest an outlet for selling the wood all at once or maybe just in larger quantities than 1 piece at a time I would appreciate it. I am in Florida and would happily work something out to get it to a new home. Thanks

Re: cocobolo lumber

#2

Re: cocobolo lumber

del schisler

i am in florida also port st. lucie are you close ??

Re: cocobolo lumber

#3

Re: cocobolo lumber

john lucas

put it in the classifieds on this site and tell everyone where you are because shipping would be costly. It would help if you had a photo also.

Re: cocobolo lumber

#4

Re: cocobolo lumber

Lisa

Thank you for your responses

I am just over an hour north of Port St Lucie.

I will get it posted in Classifieds

Re: cocobolo lumber

#5

Re: cocobolo lumber

John in NM

I guess the first thing you must figure out is if you want top dollar for your wood or to minimize the effort of selling it. Those two options are mutually exclusive.

If you want to sell as a lot, you will get the best results with a lot price - that means you get less $$$ out of it. I've not seen 2" thick material for sale retail in a long time, but I did just see 1" material retailing around $60/board foot. If you want a retailer to buy your wood, you can plan on selling it for something like half that or a bit less. If you want to ship it, I know a store in Albuquerque that would probably buy it.

If you want maximum price, you pretty much have to sell a board or two on forums like this one or ebay. I guess they do this on facebook now too. Buyers do not like the unknown of shipping costs, so it would be worth your while to figure it out for them in advance - you'll sell it faster and easier if you do the homework for the casual buyer. No one likes homework after all :D

I don't think that cocobolo being a CITES II wood is going to complicate things, but I'm not sure of that. It is possible that you would want documentation of your lumber being pre-CITES listing of the species if your sales of it can appear to be approaching professional. If its something like an inherited cache of lumber that you want to sell (a one time event), I doubt you would have any trouble with it - but then I'm no lawyer.

Re: cocobolo lumber

#6

Re: cocobolo lumber

Hank Knight

As John indicated in his post, lumber is sold by the "board foot." A board foot is the equivalent of a piece of lumber 12 inches wide, 12 inches long and 1 inch thick, or 144 cubic inches of wood. There are all kinds of tables and gadgets people use to figure board feet, but it's easy to calculate. Multiply the width of a board (in inches) by the length (in inches) then multiply by the board's thickness (in inches) and divide the resulting number by 144 to get the number of board feet. For example, a piece of cocobolo 2 inches thick, 8 inches wide and 10 feet (120 inches) long has 13.3 board feet: 2" X 8" X 120" / 144 = 13.333. At $30.00 per board foot, the board should sell for $400.00.

P.S.

Hearne Hardwoods in Pennsylvania currently lists 8/4 (2" thick) cocobolo for $20/board foot. The board foot price in my example above is inflated by 1/3 at least, maybe more. At $20.00/board foot, the board would sell for $266.66.

Re: cocobolo lumber

#7

Re: cocobolo lumber

TomD

If you could find someone with a good resaw, you could increase the value significantly by having them sawn for backs and sides for guitars. The prices for those are closer to 200 dollars a board foot at the bland end. You can figure on loosing about 1/3rd of the wood in sawdust, and further cost for the cutting. And the wood has to be suited to the use. But you get more money, the backs and sides are easily sold over ebay, as far as parcel weight and so forth is concerned. You should only sell to US addresses.

http://www.lmii.com/products/mostly-wood/backs-sides/cocobolo