Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Mildew stain in Oak floor - Help!

Posts

Mildew stain in Oak floor - Help!

#1

Mildew stain in Oak floor - Help!

DONinSTL

I have some friends that went on a six week visit to see relatives. They were kind enough to allow a somewhat irresponsible distant relative, with a teenage son (learning to also be irresponsible) to stay at their home while gone. When they returned the teenager was gone, but not without first damaging the Oak floor by leaving wet towels lying in a pile. There is black mildew, which will not wash off. They believe the floors are finished with shellac. Anyone know the best approach to correct the problem? (The mildew, that is. I already know the answer regarding the mother and teenager.) We would really appreciate your help. Thanks so much.

Re: Mildew stain in Oak floor - Help!

#2

Re: Mildew stain in Oak floor - Help!

Bill Tindall, E.Tn.

Chlorine bleach will bleach the black stain from mold colorless. It works dandy on drywall, and outside trim, shower pans and the like. How it works on an oak floor remains to be tried.

The child is likely no less responsible than the parents, I predict.

Re: Mildew stain in Oak floor - Help!

#3

Jason Roehl in Lafayette, IN

Re: Mildew stain in Oak floor - Help!

Jason Roehl in Lafayette, IN

More than likely what you have is a stain from the water reacting with the tannin in the oak. Oxalic acid can remove or reduce that stain, depending on how deep it is. I'd be surprised if shellac were the only finish on that floor. For best results, the finish would need to be sanded off, oxalic acid applied (I've let it sit in a puddle overnight), then the floor can be refinished. But, if the stain is too deep, the only complete remedy is to replace some of the flooring.

Jason

Re: Mildew stain in Oak floor - Help!

#4

Re: Mildew stain in Oak floor - Help!

Barry Irby

I have searched for a solution to this problem for years. It seems to me that there should be some chemical process that would reverse the staining, but I have not found it. To be clear, in most cases I was working on pet stains, caused by urine. I did have better luck with water stains where somebody left a potted plant sitting on the floor too long.

If you find something that works, let me know.

Re: Mildew stain in Oak floor - Help!

#5

Re: Mildew stain in Oak floor - Help!

Ralph Lipeles

I've had success doing that on the inside of a bathroom door. It had quite a bit of black areas. I took the door down to the shop and let it sit on 2 saw horses. I then swabbed it with 50% thinned bleach. It took several applications to get it all. I then let it sit for a few days, sanded and coated with 2 coats of varnish. It came out looking pretty good.

Re: Mildew stain in Oak floor - Help!

#6

Ditto

Bill Tindall, E.Tn.

I have used 1:1 diluted Chlorox for mold stain bleaching on the places I have used it, but I have not tried wood. Glad to hear it is successful on wood too.

Re: Mildew stain in Oak floor - Help!

#7

Agree with Barry

Dick Coers

If it's one big black splotch, it's likely a chemical reaction and not mold. Household bleach won't touch it.

Re: Mildew stain in Oak floor - Help!

#8

Re: Mildew stain in Oak floor - Help!

DONinSTL

Thanks for the help, all. We'll give the bleach a try first and hope for the best.

Re: Mildew stain in Oak floor - Help!

#9

Re: Agree with Barry

Howard Acheson

There are three bleaches used by woodworkers. The first is a chlorine bleach that is used to remove dye stains. Second is oxalic acid which removes mineral water stains (ie;) black stains on high tannin woods like oaks. The third is two part A/B stain remover used to remove or lessen the natural color of woo.

I would think that sanding the floor with a commercial floor sander may be you only choice. If you can find a good floor finish, they may be able to remove the affected boards and replace them with new.

Re: Mildew stain in Oak floor - Help!

#10

Re: Agree with Barry

Barry Irby

Makes me a little nervous when anybody agrees with me.

I said I had not had much luck. My experience was that chlorine bleach did almost nothing. The next step was Oxalic Acid, I think. Whatever it was it was so powerful it bleached the spots white. Really white. Almost as bad as black. Played with stain and tried to hide/blend it back to the original color.

What actually works is to replace the pieces and sand the floor. Some oak is labeled on the back. Red markings mean it red oak. Black markings mean white oak, (I'm guessing they did not have white ink/paint) If you can't tell or its not marked, take a small scrap out of the floor and stick one end in water and blow into the other. You can blow bubbles through red oak and not through white oak.

Once its you think it through removing and replacing the pieces is not a very hard wood working process. If you want to try it ask me or Wood Central if you need help.

My best results without replacing the flooring resulted from sanding and refinishing. Sanding removed a little of the stain, reducing the diameter of the problem slightly. Then I stained the floor slightly darker than the stain and sort of feathered my way across the pet stains stains.

Throw rugs are your friend.

Re: Mildew stain in Oak floor - Help!

#11

I don't

Bill Tindall, E.Tn.

We are told the stain resulted from wet clothing on the floor. The likely result is mold and mold will quickly penetrate deep, as deep as the wood remained wet. Mold poop is dark blue, black in high concentration. Hence growing mold leaves behind black poop. ( I am taking some biochemical liberties calling it poop). It is doubtful that a mold stain will be removed by superficial sanding for it may have penetrated deeply. Chlorine bleach will decolorize the black stain resulting from mold. Oxalic acid will not, see below.

Many metals, iron for example, combine with tannin to form a dark blue compound that looks black at high concentration. Iron combines with oxalic acid even better than tannin. Hence oxalic acid (and citric acid) will yank iron atoms out of the tannin compound and turn them into the colorless oxalic acid -iron compound.

Old wood and old finish will be darker than new wood and new finish, so it will be a difficult staining job to get the renewed spot looking exactly like the original.