Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Well that will show me what for, a little long..

Posts

Well that will show me what for, a little long..

#1

Well that will show me what for,  a little long..

Dick Coers

Never had this happen before.

Back story first. A couple of years ago I bought a 19" G0514x2 bandsaw from Grizzly. On the first running, I knew I had trouble. It had a horrible vibration. Found out the bottom wheel had not be fully machined (partial raw casting surfaces still showing on the vertical face) and they filled it with balance holes on one side and added steel plates to the back face on the opposite side to attempt to balance it. Called for parts, called for a second order of parts, and after a couple of weeks, got it all back together. Found out then the top wheel wasn't a lot better. They took the machine back, I didn't want a replacement. I guess I spoke about the poor quality a little too much on a sight where Grizzly has a large presence. I was banned from the site for 6 months for "not being friendly". I also posted a 1 star review on Amazon, along with another guy that had the same issue on his machine. Today, my wife orders a couple of electronic pickups for her mountain dulcimer from Amazon. Grizzly is the company that fulfills that order and she got this message back from them; "While we appreciate your continued interest in our products, a previous transaction / communication with you lead us to conclude that it would be mutually beneficial for us to discontinue our business relationship. Accordingly, we are unable to process your order, and will not be able to accept or process future orders."

I guess that will teach us a lesson!!!! What a hoot!! LOL!!!!

Re: Well that will show me what for, a little long..

#2

Wow!

John in NM

I've never heard of such a thing either, that is an astounding attitude for them to take!

Kind of the opposite of some of out favorite suppliers around here, those that go out of their way to make bad experiences right and do so knowing that the increased sales that come from their sterling reputation will make up for the small loss on fixing problems.

Re: Well that will show me what for, a little long..

#3

Re: Well that will show me what for,  a little lon

TomD

I posted a review on Amazon, and I immediately got a phone call from the president of the company I was reviewing. Turned out to be a positive experience, but as those of you who (don't) know me know, I don't exactly include my address and cell number in my online presence. I know competent computer folks can dig up a lot regardless of what you put out there. It does go to show though, that increasingly we are being watched for what we say as negative reviews on major sites are being watched. I guess they also probably have to protect themselves against fake reviews by competitors or cranks. I now only do positive reviews as anything else gets too much negative feedback. Which either means I am targeted by company remediation, or that people just don't like the bad news. I get the latter vibe around here. Positives outweigh negatives. I should say that most of my experiences have been positive, we are all careful consumers, and a lot of stuff I get from Amazon is not really stuff I would end having a negative view on. If the latest so and so novel isn't the best, I probably wouldn't say so since it comes down to personal preference. But when you feel like you were ripped off and you want to say something, I am no longer sure that is really to my advantage. I had a bad experience with Samsung that I am considering in this light. I think that if one pays for a guarantee it the company should make some effort to determine whether their parts are the cause of the problem. But is it worth the trouble?

Re: Well that will show me what for, a little long..

#4

As Confucius say "Chinese bear remember everything


Re: Well that will show me what for, a little long..

#5

Re: Well that will show me what for,  a little lon

William Duffield

Whoever that woodworking forum is, I would take with a grain of salt anything anyone posted on it. Even if it's subconscious, the attitudes and expressed opinions of all the people who post there are influenced by the owner's "editorial policy." I just hope it doesn't rub off on their attitude when and if they come over to WoodCentral.

You don't need to be a shill to "play nice."

I have learned not to buy their tools, and I don't appreciate it when I see conscientious woodworkers personally attacked by their minions for pointing out their quality, feature and service shortcomings.

Re: Well that will show me what for, a little long..

#6

I wonder if Dick downplayed his actions some.

Yonak

Tom, while I appreciate your point of view, based on Dick's description, I feel a bit awestruck by Grizzly's response and find it disconcerting.

Re: Well that will show me what for, a little long..

#7

Glad to hear it

Bill Tindall, E.Tn.

Now I will not be tempted to order a mortise machine from them, or anything else.

BTW, it must be hard to be "Friendly" when you have two ineptly manufactured wheels from a company. Must be this site has participants that are more tolerant of receiving defective tools.

Re: Well that will show me what for, a little long..

#8

I did participate in discussions on Grizzly

Dick Coers

I'll admit to telling that story often. When people came on that forum, asking for help in deciding on making machinery choices and when they had problems with their machines, I told my story. There are a lot of posts on that forum, asking what to buy, I always responded. In particular situations where the owner had vibration issues with a Grizzly band saw, I got very specific about the issues I had with mine so they knew what they were up against, and how to fix it. I felt my machine was a perfect example of their quality control, so I always suggested people buy other brands. The factory knew that lower wheel was junk because of all the labor they put in it in an attempt to balance it. If I remember correctly, there were 9 balance holes drilled on one side, and 4 steel plates riveted on the other side, but still shipped it. The upper wheel was not as bad, but I sent a video to Grizzly customer service. They agreed there was a problem with it as well. That bandsaw was on backorder at the time and in shortage.

Re: Well that will show me what for, a little long..

#9

Re: Well that will show me what for,  a little lon

BrianMonumentCO

The only thing that I have to say about the quality of Grizzly tools, I have have a mill. And it is of good working quality. Every bit as good as the Bridgeport I trained on at gunsmith school.

I have no experience with grizzly for consumer grade woodworking tools.

I wonder if this whole problem is related to a difference in quality control between consumer items vs more commercial items. Or is it a time quality control evolution process issue.

I am happy with my mill.

Re: Well that will show me what for, a little long..

#10

Re: Well that will show me what for,  a little lon

terry quiram

Pardon me if I laugh out loud. (Dick and I are friends) I had a simular experience that ended up with me telling Grizzly I would never buy a corded tool from them again, nor would I recommend them to anyone. But they will still sell me the other stuff. Want me to order it for you?

Re: Well that will show me what for, a little long..

#11

Re: Well that will show me what for,  a little lon

BrianMonumentCO

But did you state it on a blog or chatroom?

Re: Well that will show me what for, a little long..

#12

Hey Dick,  I think you should respond,

Keith Newton

to their "While we appreciate your continued interest in our products, a previous transaction / communication with you lead us to conclude that it would be mutually beneficial for us to discontinue our business relationship. Accordingly, we are unable to process your order, and will not be able to accept or process future orders."

If I'd know this was coming from you, I would not have ordered it in the first place.

As many great responses and good advice as I've read from you, I would have no doubt that you know what you are doing, and that they just used poor judgement in their treatment of you in this transaction.

Re: Well that will show me what for, a little long..

#13

Re: Well that will show me what for,  a little lon

C. John Hebert

People have been beating up on Grizzly as far back as I can remember, and I continued buying without any problems!!!! I had a shop full of Grizzly until I retired and have nothing but praise for them. Granted... some have had legit problems, but I can only speak for myself. I would do it all over again with any purchase without hesitation.

Re: Well that will show me what for, a little long..

#14

To clarify Dick's point

Bill Tindall, E.Tn.

Every company has problems. It is how often and what they do about them that sets companies like Lee Valley apart from companies to be avoided by customers that don't like risk.

At the first sign of a defective machine if this company had promptly replaced the machine with one that worked properly Dick would be singing the praises of Griz just like some of you that have had good experience with Chinese manufacturing.

In contrast, a friend bought a large Powermatic machine that had a problem. A technician was sent to his shop and the problem was promptly fixed. This kind of response costs money that is reflected in the selling price. Buy a cheap machine and expect to be dealing with a company that looks for every opportunity to cut cost and quality.

When I toured the Lee Valley manufacturing facility I noticed a container of plane body castings in the "scrap" area. I was told that casting is farmed out, just like the Grizzzly wheels, no doubt. Upon receiving, each casting is inspected and if not perfect the casting is returned to the place that cast it. No doubt this is one reason that LV planes cost more than planes made in China. When one buys from a company that prides itself in customer service and manufacturing quality there is no risk involved. Buy cheap and be prepared to deal with risk.

Re: Well that will show me what for, a little long..

#15

Their machines never give me pause...

John in NM

But their treatment of a customer wit a problem does.

I've used a couple of their machines, a big jointer and a table saw, both were fine machines. Bandsaws are a bit trickier to make well than either of those two, but I certainly wouldn't rule out Grizzly based on where they are made (I am in fact considering buying one of their belt sanders). For what you get - a Chinese machine - they seem to be priced fairly. You roll the dice and take your chances with Chinese manufacturing. I may have to repair or improve a Grizzly machine, but I'm capable of doing so and I have a higher expectation from their stuff than stuff from Harbor Freight - even if the two machines came from the same plant in China.

However, to treat any customer, even a vocally displeased one, in such a way is frankly appalling. Someone in that outfit has no understanding of the demographics of their customer base. People and companies generally have the reputations they earn.

Re: Well that will show me what for, a little long..

#16

Hey Dick, I need a part from Grizzly....

Barry Irby

can I use you as a reference? Even better, would you order it for me?

Bought a used table top morticer and need a sleeve for it to reduce the "chuck" to 5/8" to fit my existing hollow chisels. Got almost nothing in the machine and don't want to buy bits that cost more than the machine.

Re: Well that will show me what for, a little long..

#17

Re: Their machines never give me pause...

C. John Hebert

Hey John....best you be better informed before you post rumors. Not made in China, but in Taiwan. Delta makes replacement parts in China...

;-)

Re: Well that will show me what for, a little long..

#18

I had a long, good history with Grizzly

Dick Coers

I bought my first Grizzly machine in the late '80s, and bought some big machines for the model shop I ran at Caterpillar. Basically I was pleased with all of them, but I always continued to buy higher quality and don't own any today. My biggest beef with the bandsaw? Those wheels were so far out of balance they should not have been used. A bandsaw is very simple, and both of the main rotating parts were bad. Grizzly was quick to ship parts, but, they sent me a bare lower wheel, no bearings, no tire. They wanted me to drive out the bearings and reuse them. The only way to drive out the bearings was with a drift pin against the inner race. That ruins bearings in my mind. So I had to request another order of parts with new bearings and a tire. When those came, the drive pulley on the wheel they sent did not fit over the wheel brake. I had to take the old pulley off and switch them. It was not a lower wheel for my model. Then it started all over again when I put the blade back on and ran it. I'm rebuilding a brand new machine for them in my shop! An engineer friend came over and we started playing with ways to reduce the vibration. All it took was a 2x2 against the lower trunion, to the floor. The machine was very steady with this brace on it. We then saw that the body of the saw was welded to the center of what was basically a sheet metal pan as the base. A couple of pieces across that pan to stiffen the flat surface would have solved the problem. I sent Grizzly the results of this testing. So it was really a lack of engineering and very low acceptability tolerances from the factory or selling company standards that made me want to return the saw. What kept me in the hunt to keep people informed, was the way I was treated in that other forum. I had the title of posts changed, and posts edited. Then they were deleted. I had Grizzly zealots getting angry with me for even telling my story about the machine. There was an identical situation for a guy with the exact same machine 1 year latter. If all people get are glowing reviews on a machine, they (and I at the time) expect a great machine. I was just telling people what I got. As mentioned, I was banned from the forum for continuing to tell my story. It's my opinion that if a company is confident in the quality of their machines, they would actually encourage me to purchase from them again to prove it. Instead they have black balled me and refuse to sell me anything. It actually makes the point that they aren't confident with what they ship.

Re: Well that will show me what for, a little long..

#19

Re: Guess it depends on who you contact

Larry Clinton At Frankfort, (Central) Indiana

I have purchased two Joiners and my 3 HP Cyclone dust collection system. I did have an issue with the motor on the cyclone. I contacted them ~ they sent the wrong motor starter, so contacted them again. Second time they sent the right parts along with some extra parts. All was corrected within 10 day from my first contact. The joiners (one 6" with straight blades ~ second an 8" with the carbide inserted head) both worked perfectly out of the box, and the fit, finish and vibration is far superior to the Powermatic woodworking drill press (paid a grand for).

I did check the planers for flatness with Lee Valley straight edge and shims, and the beds were within .002" of dead flat (in 48") and co-planer. The fence has .002 or .003" "twist", but certainly nothing that affects my work. I did examine Delta, Powermatic, and other tools at the last woodworking show I attended a few years ago and their visual quality (fit, finish and engineering design) sure appeared far below Griz quality at the same show.

I am pretty stubborn so if I had an experience like yours, I would have kept Grizzly on the phone until the situation was corrected to my satisfaction or the machine returned.

Experiences like you had are why I often purchase major items on a credit card (then pay it off when the statement arrives). I have had a couple of bad situations (not with woodworking equipment) and so contacted the credit card company, they intervened, problems are then solved very rapidly! Most credit cards also double your warranty IE: if the manufacture has a one year warranty the card company gives you an extra year for free.

Re: Well that will show me what for, a little long..

#20

Re: Their machines never give me pause...

Jesse Cloud

I've had pretty similar experience to John's with Grizzly.

While I was taking a course at a community college, the instructor invited us to bring our own machines in and we would tune them as a class.

Coincidentally, two combo machines came in the same day - a Grizzly and a Jet. They appeared identical except for paint and labels. As we looked more closely, the Griz had much rougher fit and finish than the Jet. Sharp casting edges needed to be ground off for instance. The Jet was flat and parallel where it needed to be, the Griz took a couple of hours of fiddling to get there.

At the end of the day, both machines worked well, the Griz just took a little more

TLC, though I suspect it cost considerably less.

I think Bill nailed it: if you are willing to accept some risk, Grizzly may be a good deal. On the other hand, there is just no excuse for such poor customer service.

Re: Well that will show me what for, a little long..

#21

Re: Well that will show me what for,  a little lon

clay foster

Grizzly has a history of letting their customers do the quality control for them.

Re: Well that will show me what for, a little long..

#22

Re: I wonder if Dick downplayed his actions some.

TomD

Thanks Yonak. I am not at odds with Dick on any of this. My point is watch yourselves out there, because people are watching you. And also decide what is in your best interest. Not that I wouldn't take a hit for the team on matters of principle, but at the same time, my other observation is that you aren't going to be thanked for pointing out problems. People that read comments tend to fall into various groups: They bought it they just want to hear good stuff from other people who bought it, they are going just feel it sucks to be you about the reviewer; there are people who will skip your review because they want to buy it and are really looking mostly for positive reviews. And so on. Everyone knows that they might run into a wall, but as Bill says they are taking the risk. I got lucky when the guy who tagged me off amazon turned out to be a find a solution guy, but I don't really need the hassle of being barred from grizzly. Grizzly whatever it's failing has a lot of stuff you won't find elsewhere at reasonable prices. I have dealt with their Northern counterpart, and somewhat with them, and they do their best up here to solve your problems, they know me by name when I go into the store.

Re: Well that will show me what for, a little long..

#23

Re: Their machines never give me pause...

BrianMonumentCO

According to one individual who contacted Grizzly tec support, their machines are made in BOTH china and Taiwan.

Re: Well that will show me what for, a little long..

#24

Haha!

John in NM

Good thing you're looking out for me if I do spring for a belt sander! :D

Re: Well that will show me what for, a little long..

#25

Re: I had a long, good history with Grizzly

TomD

Your last point is hardly for sure. I would wonder what their actual policy is. Recent experience is suggesting that these online reviews while mildly about "sharing my story" are actually pretty devastating to some companies. Ebay has almost flipped it seems to me where a lot of sellers (I am a buyer only) are really upset with how one-sided it is. Grizzly has no easy ability to tell others what they think of you (all great I am sure). The "balance" is that a "buyer" can basically post whatever they want, even without proof of an actual sale, and all that the manufacturer can do is post counter-factuals, which is a pretty loosing hand, or get the lawyers involved, which they do. Should they risk dealing with a known critic (however sound), and incurring more wrath, or should they politely decline to do further business. What is telling is that they tracked all this so that they could take the action they did. That is the real take away here.

How much of a financial penalty would you feel was reasonable for the treatment you received relative to the purchase itself? 50 dollars? 500? What if your comment cost them 5000, would you feel happy, or that maybe the comment was overkill? I have no idea what this stuff costs, but the fact I got calls from 5 thousand miles away from the CEO with mention of his lawyers makes me believe it is well north of 500 bucks.

Even the statement that they blackballed you is a little out there. That involves a jury of your peers passing judgement on you in a way that can drive you from society, the country, or a means of making a living. It can be a virtual banishment. It also has the connotation, of certain racially driven discriminations. It is different from a trader simply deciding not to take your business because you have a know inclination to drag his name through the gutter. Even if he deserves it, why would he sign up for more? I think we all auto parse other people's comments an what seems fair to us may not seem fair to them.

Successful business people are about the bottom line. I used to run these industry panels, and if we had a hard decision the business guys would consider giving the guy half the penalty if it was too difficult to decide on guilt or innocence. You can't do that obviously, but it was fine with them (they got the required guidance), but it's a mindset. They sell us stuff to make money, if selling us stuff looses them money, the situation is pretty obvious to them.

One thing to keep in mind about computing is that it makes tracking everything cheap. If someone posts a negative comment, and the sales of a product go to zero off that placement, do you think the company gets feedback?