Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

OT-Cost to install toilet

Posts

OT-Cost to install toilet

#1

OT-Cost to install toilet

mdclor

I realize there are many variables involved, but I would like to get a ball park estimate of the cost to install a toilet in my shop.

My shop is on the lower of the house and the waste line exits the house under the floor in the finishing room. I have a utility sink in the finishing room with hot and cold water. The house is a 4 bedroom with 2.25 baths so I don't think there will be any issue if a permit is required. I think that a hole will have to be cut in the concrete slab of sufficient size to attach to the waste line. Unfortunately, there is in-floor radiant pex tubing in the slab.

I would like to have an idea if this might cost $500 or $5000 before I start calling plumbers. If the latter number is closer to reality, I probably won't bother making any calls.

Thanks for any assistance.

Re: OT-Cost to install toilet

#2

as a small businessman....

Dick Coers

I would often like to reply to "a ballpark estimate". "Well sir, a ballpark costs about a billion dollars." But only one of us would be laughing!

I've never hired a plumber, sorry can't help with any numbers. I'd guess around $2500, $100/hour, less than 3 days for one guy, plus parts. Let's see what others have to say.

Re: OT-Cost to install toilet

#3

Jason Roehl in Lafayette, IN

That's a good one, Dick!

Jason Roehl in Lafayette, IN

Anytime someone asks me for a ballpark estimate (usually over the phone) on what a painting job might cost, I give them such a large range (which is reality) such that the "ballpark estimate" is worthless to them. I may have to start using the $1B number!

PEX tubing in the floor? I bet you don't get too many takers. Otherwise, it's a pretty straightforward plumbing job that would be around $1500, I'd guess.

Jason

Re: OT-Cost to install toilet

#4

Re: OT-Cost to install toilet

Barry Irby

I like Dick's answer also and may steal it.

I think Jason is low on the $1500. Maybe not, but it depends on a lot of variables. How far will they have to break up the slab? What type of pipe is the existing sewer? How big is the pipe for the existing sewer? Big enough for a toilet? Or is it for a sink only? How far to run the cold supply to the toilet?

And, can you even cut and repair the radiant heat in the floor? My understanding is they run it in continuous loops without splices in the floor. The pipe must be very tough because it tends to try to squirm with the heating and cooling. Not sure any splice woudl be acceptable. Double check with a plumber.

On my home inspections I give estimates (Guestimates or SWAGs is more likely) and I usually put what I think it will cost and then double it. So If your install is straight forward and easy I think it might easily cost $2500 so my estimate would be $2500 to $5000. Also, bear in mind, there is always somebody that will charge you more.

Re: OT-Cost to install toilet

#5

Re: OT-Cost to install toilet

don stephan

In addition to waste and cold supply, a toilet also requires venting. Getting estimates from at least a couple reputable plumbers would be advisable in my opinion as you might different ideas on locating the toilet to minimize costs to run water supply and vent.

Composting toilet might be another option.

Re: OT-Cost to install toilet

#6

Re: OT-Cost to install toilet

mdclor

I appreciate the insights. It is looking like this might be cost prohibitive; I can run up and down stairs a lot of times for $2500. :D

Re: OT-Cost to install toilet

#7

Re: OT-Cost to install toilet

Barry Irby

Running up and down the stairs is good for you and cheap.

Re: OT-Cost to install toilet

#8

Re: OT-Cost to install toilet

Doug Wolf

Maybe all you need is a Urinal attached to the sink drain if that's legal?

Re: OT-Cost to install toilet

#9

I was told that to estimate

Gary Smyth

a kitchen take a /$20 dollar bill and run it around the perimeter of the space. For a bathroom use a $50 dollar bill. That estimating procedure was delivered to me fifteen years ago. At that time the estimate was pretty close for a updated kitchen. It probably does not apply these days but something to ponder.

I wonder. Could the toilet be plumbed if it were on a platform so that the floor need not be broken?

Re: OT-Cost to install toilet

#10

EEEWWWW!!!!

Mark Nowicki

.... might as well skip the urinal.

Mark

Re: OT-Cost to install toilet

#11

Re: OT-Cost to install toilet

Bill Turpin in WNC mountains

Back when I did restaurant repair we had regular customers that got work done by a hourly rate and materials. If forced to give a hard quote, we figured the job, quadrupled the labor, doubled the materials. Seventy-five % of the time we would actually make a profit. Your job with heat in the floor: break the concrete, does heating pipe get broken? several $100 difference right there! Have fun running those stairs!

Re: OT-Cost to install toilet

#12

Rent an infrared camera

Tim Greif - West of Chicago

To locate the floor heat lines, fire up the system on max heat and record the pex locations with an infrared camera. Good luck.

Re: OT-Cost to install toilet

#13

Re: I was told that to estimate

Basil

40 years ago I graded for a large building. I used the grade I was given so it wasn't my fault that the floor of the building was 2 feet below the city sewer. The answer was to mount the toilets 3 steps up on a platform. Looked funny but it was that or put in a pump station.