Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Frame for quilt questions

Posts

Frame for quilt questions

#1

JL

Frame for quilt questions

JL

I have been asked to make a frame for a quilt.

The quilt (and the frame) will be permanently on display.

The size of the quilt would be 60" x 80". They want ALL of the quilt to show.

Therefore the interior dimensions of the frame would be on the order of 62" x 82".

Glass for the frame (1/4" tempered) would run about $250. Plexiglass would run about $100 more.

Plexiglass yellows and scratches, glass doesn't.

Glass weighs about 100 lbs or so. Plexiglass is much lighter.

Glass or Plexiglass?

I am leaning towards glass.

I was planning on making the frame out of red oak, about 1 1/2" thick. I was going to use 1/2" oak plywood for the back. I was going to cut rabbets for the plywood and a dado for the glass. I was going to use a single French cleat across the back to tie the sides (and top) together and a spacer piece of wood near the bottom to keep the frame away from the wall there.

How should I "bed" the glass in the frame?

Anything else to worry about?

Thanks.

Re: Frame for quilt questions

#2

Re: Frame for quilt questions

Jim Hoeller

Acid in the plywood backing may stain the quilt. Perhaps 1/4" plywood with an acid free backing material between the quilt and the plywood would be a better alternative.

Re: Frame for quilt questions

#3

Non-glare glass?


Re: Frame for quilt questions

#4

Re: Frame for quilt questions

don stephan

You might ask for guidelines and suggestions from museum(s) displaying quilts. No idea how you would keep the quilt from sagging due to gravity.

Re: Frame for quilt questions

#5

JL

Lower acid wood

JL

I can use maple or poplar plywood which have a much lower acid content.

I can also put the paper there.

In terms of securing the quilt, I would use quilting pins into the wood.

Re: Frame for quilt questions

#6

Re: Frame for quilt questions *LINK*

Bob Entwisle in NJ

Hi JL,

Here are some links to some info on quilt display and care. Perhaps if you contact someone via one of the links, they can provide you some better guidelines as far as glass frame etc.

https://sustainingplaces.files.wordpress.com/2012/11/resident-expert-quilt-mounting.pdf

http://museum.msu.edu/glqc/quiltcare.html

http://www.quiltmuseum.org/quilt-care.html

Bob in NJ

Re: Frame for quilt questions

#7

JL

Many thanks

JL

I will send these on.

Re: Frame for quilt questions

#8

Re: Many thanks

Barry Irby

How about some sort of glass that reduces UV. I notice my eye glass lenses do not darken inside my car. I was told the Auto glass filters out the UV. Never investigated it to see if that's true or whether it is protecting me or not. Seems like a good idea though.

Re: Frame for quilt questions

#9

Re: Frame for quilt questions

Gary Smyth

Do not seal the quilt in but make a provision for air to enter and exit. Moisture can collect if encased in glass. I didn't see that recommendation in the links, but I may have missed it in a quick read.

Re: Frame for quilt questions

#10

Kneale Brownson

No Pinning

Kneale Brownson

The quilt should have a sleeve on the back side and hang from a bar.

Re: Frame for quilt questions

#11

Re: Frame for quilt questions

paul in AZ

I would seriously question the idea of a glassed in frame unless the quilt is a centuries old and very fragile relic. Heavy! You will need 3 men and a whip to move it, let alone hang it.

As Kneale said, quilts meant for display have a sleeve sewn into the back. I have such a quilt that has been on my wall for 30+ years. Run a dowel or rod through the sleeve, suspend by the dowel ends and problem solved.

But that simple solution could cost you a job.

Re: Frame for quilt questions

#12

JL

Has a sleeve