Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Reversing Router Rotation

Posts

Reversing Router Rotation

#1

John Pierce

Reversing Router Rotation

John Pierce

Can the router rotation direction be reversed on a PC 8529?

Re: Reversing Router Rotation

#2

I have to ask why?

John in NM

Left hand cut router bits are not exactly easy to find! :D

(I've looked because my duplicator runs two of the 4 spindles left cut).

As to the question, I think you can do it by taking it apart and reversing either the field leads or armature leads - but I am certainly not sure of that, there's people around here who will know better than I do.

Re: Reversing Router Rotation

#3

Re: I have to ask why?

John McGaw

I believe that would work but the results might not satisfy. IIRC the brushes/commutator in universal motors are 'biased' if favor of the normal rotation direction and would provide less torque in the opposite. But, as you say, why?

Re: Reversing Router Rotation

#4

John Pierce

Re: I have to ask why?

John Pierce

I have a rail cutter which allows the stile cut to be achieved by reversing the roller and cutter blade on the bit post. When I reverse them the cut rotation reverses also. Thus the existing rotation of the bit in my router will not work. I guess I will have to try and find stile bit which matched the rail pattern. So much for proceeding with my cabinet project.

Re: Reversing Router Rotation

#5

Something is wrong here, no router reverses

Dick Coers

What brand of bit? I think you are doing something wrong, but I think I may need a picture to help. Maybe I can help if I know exactly what the bit it is.

Re: Reversing Router Rotation

#6

Are you sure that is what it's designed to do?

John in NM

The reason I ask is that bits that are designed for left hand cut generally have left hand threads for stuff like the post nut. Could be that this bit is designed for quick changes without height adjustment or something like that.

I'm not really up on stile and rail sets, I thought most came with separate cutters for each - perhaps a mirror image cutter that you can drop on the same arbor post without having to re-index the height?

Re: Reversing Router Rotation

#7

John Pierce

Re: Something is wrong here, no router reverses

John Pierce

After the responses to my question, it dawned on me that perhaps I should change the sequence of the cutters on the post rather than flip them over to achieve the profile I wanted. After I tried that I discovered that the cutting was in the correct direction and my problem was solved. So thanks for the insight.

Re: Reversing Router Rotation

#8

Glad to hear it!

John in NM

Cool to get it worked out without having to buy parts :D