Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Juke box

Posts

Juke box

#1

Juke box

Joe in a Cleveland suburb

We call this 'the juke box'. It has a mechanism at the top that appears to have accepted coins and would then play music from a big round metal disk with holes punched into it. Like a music box. It belongs to my mother inlaw. Her great great Grandmother brought it with her from Germany when she moved here sometime in the mid to later part of the 1800's

In the pictures below, you can see where on the right side there is a piece of molding missing. It looks like it would be really easy to replicate the missing piece.

The wood looks like Walnut to me that has lightened over the years.

I was asked if I could make a piece of molding like what is missing. Because this 'juke box' is supposed to go to my daughter some day, I said I would look into it.

I am just thinking ahead here, but if I were to make a piece of this molding (probably profiles 2 or 3 profiles stacked together), would anybody like to suggest finishing options in regards to lightening the walnut (leave it out in the for a month or two? A/B bleach or similar?) and matching that color?

Right side showing piece that needs to be replicated on the left side


Showing the left side missing piece


The juke box


You can see some of the metal records sitting next to it. It still plays.

This is not something I am going to start on soon. I am just thinking/wondering aloud.

Thanks.

Re: Juke box

#2

Re: Juke box

John Pappas

Joe, I think walnut would be too dark. I would go with a lighter wood that had similar grain. To match the color, I would try to come close with a dye stain, then tweek the color with some glazes made with oil/varnish/artist pigments. Jeff Jewitt has a good color wheel that would be helpful in pigment selection. I am far from an expert here, but I have been successful in a couple of repairs doing this.

Re: Juke box

#3

Re: Juke box

William Duffield

If it's walnut, it's Carpathian Walnut (Juglans regia), not Black Walnut (Juglans nigra). It is naturally lighter in color than J. nigra. West Coast suppliers will have Claro Walnut, which is also J. regia, at least the part above the graft. You don't want the highly figured wood that is from the graft area, because it won't be straight grained, and won't be the right color. Make sure you get some extra stock, so you can experiment with color matching.

I also surmise that the molding was made in three pieces and mitered at the corners. Otherwise, the end grain of the sides would be a lot darker. OTOH, I doubt that it is stacked. You won't find router bits that will match it, and you won't find a single complex moulding plane that will do it either, so your best bet would be to use hollows and rounds and a rabbet plane to duplicate it.

Note that there are at least three other pieces of moulding missing. One is two or three inches above the piece you have marked. The second is a simple block at the top of the right column. The third is the right corner of the dentil moulding just under the crown moulding.

Re: Juke box

#4

Re: Juke box

Tony - Memphis

It has a little bit of red tint to it. I might try and play around with some dyes to match it (lockwood dark colonial red is a nice brown red). Might even use some butternut to start out light and make it darker with the dye. Glazes are nice too - oil based - because you can wipe them off it they don't look right (and you don't wait too long!). Neat piece!

One other thought, I noticed that Lonnie Bird builds a lot of pieces with walnut. Not sure what he does to them, but they look aged. So, there may be a technique that will prematurely age walnut. But even with that, the colors I've seen don't look like what you have. Might be worth asking Jeff Jewitt. He used to have a forum. Not sure if it is still live.

Tony

Re: Juke box

#5

Re: Juke box

Barry Irby

William beat me to it. I noticed the other missing pieces.

You have gotten good advice on the rest of it.

If you have trouble replicating the piece You could take the existing one off and make two that are nearly identical to it and install the two new ones.

Re: Juke box

#6

Re: Juke box

don stephan

Jeff Jewitt's forum is alive and well. Should be able to access from www.homsteadfinishingproducts.com

Keep in mind Joe that dyes and woods may change color/hue with time and/or exposure to sunlight.

Re: Juke box

#7

orange shellac

Dick Coers

is a fine undercoat to mimic older yellowed clear finishes.

Re: Juke box

#8

Because....

Brian Roberts

if it is the original finish it was almost certainly shellac....so good suggestion Dick!

Also...while the suggestions to do color matching with various tints, etc. may result in an immediate match....it WILL change over time as it fades with exposure to UV and will stick out like the proverbial "sore thumb".

It will also look different right away if displayed in different light than it was in when matched.

All things we learned (the hard way) in violin repair school.

Re: Juke box

#9

Re: Juke box

joe in a Cleveland suburb

Thanks all.

Sounds like a little project I won't take on.

At least not right away.

Re: Juke box

#10

why not

Bill Tindall, E.Tn.

You experimented with dye to get your clock color. What is different? Likely you can use the same dyes to arrive at something close. Get started on the walnut parts and leave them in a bright sunny place a week or two to be rid of the purple color and then tint away.

Or, see if there is a premix stain available to get you close. Take a piece of the sun tanned walnut to the store, for example Woodcraft, and ask them to dab a bit of this and that stain on your test piece.

Re: Juke box

#11

Re: why not

Joe in a Cleveland suburb

I will probably give it a shot at some point. It's just not next on my list.

Thanks.