Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Older Festool Mini and HEPA filters

Posts

Older Festool Mini and HEPA filters

#1

Older Festool Mini and HEPA filters

Eric

I have about a 10 year old Festool Mini. I was ordering bags and noticed that they have HEPA filters available now. I'm wondering if I can use the new HEPA filter on my old unit. I called Woodcraft (where I bought it) and they didn't know so I figured I'd come to the well of all knowledge.

Any advice, experience or thoughts would be welcome.

Thank you.

Eric

Re: Older Festool Mini and HEPA filters

#2

Re: Older Festool Mini and HEPA filters

Rick Christopherson

Ugh, I was hoping someone else would answer, because I was too lazy to walk down to the shop to confirm. :\ Yes, the new filters, and even the holders, are the same across all CT Mini's.

However, unless you need to replace the filter, I wouldn't bother changing it just to change it. The difference is just a slightly finer pore size. As long as you've been using a collection bag, your existing filter is not likely fouled. (That's a testament as to how effective the bag serves as a pre-filter.)

Yes, the new bags are better than the older ones, in that they will break up any caking better than the stiffer brown bags.

The new CT vacs are certified HEPA. I don't believe there is any design change, but they have been tested and certified to not have any bypass air that does not pass through the filter. An older vac would be HEPA with a new filter, but it would not be certified HEPA (legal distinction).

Re: Older Festool Mini and HEPA filters

#3

Re: Older Festool Mini and HEPA filters

Mark Nowicki

The well of all knowledge about Festool is Bob Marino @1 866 FESTOOL.

Mark

Re: Older Festool Mini and HEPA filters

#4

Re: Older Festool Mini and HEPA filters

Rick Christopherson

Bob Marino is a good friend of mine and one of the most knowledgeable Festool Dealers in the United States. Getting confirmation from Bob is a good idea. However, you can save yourself some time if you start off your discussion with, "Rick said....". Bob will ask whether you mean Rick B. or Rick C., but either way, it will be a short discussion.

When I saw the question come up yesterday, I knew the answer, but I didn't have the time to go down to the workshop to get absolute confirmation. So I was hoping someone else would answer before then. When I saw it still hadn't been answered this morning, I took the time to go down to the workshop and get that absolute confirmation. It wasn't just a guess.


Re: Older Festool Mini and HEPA filters

#5

Re: Older Festool Mini and HEPA filters

Eric

Good news. Thanks very much guys.

Eric