Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Looking for a good contractor

Posts

Looking for a good contractor

#1

Looking for a good contractor

mdclor

in the Chantilly, VA area. My son would like to add a porch to his house. The first estimate is for $55,000 (yes, I typed that correctly are you read it correctly) for a 16x16' covered, screened-in porch ($214/sqft). Does anyone that lives in that area know a contractor that would be reasonable? OR am I just completely out of touch with costs these days? Thanks!

Re: Looking for a good contractor

#2

AH Yes! Chantilly, VA

Barry Irby

Heavily under the influence or the Belt Way and DC. NoVa/Northern Virginia.

Wish I could help. While that is a shocking amount of money for a porch, somehow I am not surprised. Everything costs twice as much there as further south.

Re: Looking for a good contractor

#3

Re: Looking for a good contractor

Dave Bair

I've never used it, but Angie's list does rate contractors based on other user's experiences and can link you up with estimates from providers.

Re: Looking for a good contractor

#4

Re: Looking for a good contractor

John McGaw

Can't help but I am shocked by the price. My good friends are very much in favor of screened back porches and have had such built onto two different homes by a reputable local contractor who did topnotch work. The porches were both at least 16 X 16. Both together cost about half the price you mention. Maybe less. Granted that my friends own a lot of rental properties and use this contractor for all of their big repair and remodeling work but I don't figure that he charged them that much less than the going rate because of that.

Re: Looking for a good contractor

#5

Re: Looking for a good contractor

mdclor

Thanks for the input so far. If I lived near him, I think I could build it myself for less than $10K.

Re: Looking for a good contractor

#6

Re: Looking for a good contractor

Jesse Cloud

When I lived back there it would be typical to get one or two outrageous bids on a project. The contractors are looking for larger jobs and will throw in a wild card bill that they don't expect you to buy, but if you do, they would jump on it.

Encourage him to get more bids.

Also, I wouldn't be surprised if even a small job like that would require a permit. If your son has the time to pull the permits himself, he might save a surprising amount of money. Same idea with any homeowner's assn reviews. Contractors justifiably hate those.

Re: Looking for a good contractor

#7

Re: Looking for a good contractor

mdclor

Jess, you are right. The estimate included $3000 for plans, permits and inspections. He has 2 more contractors lined up so time will tell. The job is quite straightforward-16' x 16' on posts with a hip roof attached to the house and cutting out a double window to be replaced with French doors.

Re: Looking for a good contractor

#8

Re: Looking for a good contractor

John Lucas

That's rediculous. I'm trying to get a workshop built. Unfortunately having to rethink it because the costs were more than I have to spend. The estimates I've gotten so far for a 24 x 40 foot shop have been in the 35K range. I only have 25K to spend so looking at steel buildings now. Just telling you this because that's a lot larger than your porch. Granted I'm in a rural area however one guy told me the material cost would be about 20k

Re: Looking for a good contractor

#9

Re: Looking for a good contractor

Mark Nowicki

I am a specialized contractor, (in Montreal, not in Va) and I am surprised it is not more.

The $3000 plans permit and inspection charge is about 5% of the contract price, which is on the low side for the tasks involved.

The window to french door conversion I would not do for less than $6000.

Dumpster rental and dumpster fees alone probably would add up to $2000.

Other variables, local soil conditions, site distance, access etc., that the contractor might be familiar with could account for the "unreasonable" price.

Mark

Re: Looking for a good contractor

#10

Chantilly, VA

David Yoho

Sorry to not be any help as far as a contractor. The one thing I do know about Chantilly is I go to a lumber supplier there when I need high quality curly maple. It's about a two hour drive for me but the quality is worth it.

Re: Looking for a good contractor

#11

Re: Chantilly, VA

mdclor

David, would that be Dunlap Woodcrafts? Do you think they would suggest a contractor? Thanks.

Re: Looking for a good contractor

#12

Re: Chantilly, VA

Hank Knight

I was in Dunlap Woodworks day before yesterday (Saturday). They supply high end figured American hardwoods, much of which goes for gunstocks. It does not appear the kind of operation that do much business with building contractors, but I could be wrong about that. My guess would be that if they have information on contractors, it would be by happenstance.

Re: Looking for a good contractor

#13

Re: Chantilly, VA

David Yoho

Yes, Dunlap Woodcrafts. I don't know if they would be a good resource for local contractors or not. Might not hurt to ask.

The thing about Dunlap Woodcrafts is at first sight walking into the front door you wouldn't think they have much in the way of wood. However, after being escorted into the "back room" you quickly realize these guys have tons of beautiful woods. They have about three huge doors on the back of the building that, when open, reveal large storage bays loaded to the gills with lumber. Since their main business is gun stocks for old black powder rifles, they always carry a nice selection of highly figured curly maple in various thicknesses. Great folks to do business with. Wish they were closer!!

Re: Looking for a good contractor

#14

Re: Chantilly, VA

mdclor

Thanks for the info. We are visiting Greg next month so I will make a point of going there to drool. :D