Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Question on LED light output

Posts

Question on LED light output

#1

Question on LED light output

Barry Irby

I have two 8' old school T12 Light fixtures in a storage room adjacent to my shop. They are failing from old age.

Cosctco has four foot 2 Tube LED fixtures that look like shop lights at about $40 each. The output is 3700 lumens at 4000K and they use 38 watts for each fixture. How woudl the light output compare if I replace each 8' fluorescent fixture with two four foot LED fixtures?

I have been trying to read up on this on the internet, but I am not sure I understand what I am reading. Anybody have actual experience? Looking for general illumination, not task lighting.

Re: Question on LED light output

#2

Re: Question on LED light output

John McGaw

Just a WAG from some quick research. Modern 4-foot T12 lamps seem to be rated about 2800-3000 lumen when new. I'd guess that 8-foot bulbs would be about twice that or 5600-6000 lumen. I'll leave you to do the math. The LED fixtures seem to be much more efficient though since 38W is not uncommon for a single 4-foot tube.

Re: Question on LED light output

#3

Re: Question on LED light output *LINK*

walta

I saw this one at Home Depot they looked good.

They are designed to plug together and look like it is an 8 footer.

It says 3200 lumens but they are both Chinese ratings and likely no more accurate than Chinese horse power numbers.

Walta


Depot

Re: Question on LED light output

#4

JL

Re: Question on LED light output

JL

I bought one of the Costco LED light fixtures and hung it over my jointer/router table area.

I am favorably impressed. It puts out a decent amount of light. It compares well w/ my existing fluorescent fixtures.

It came w/ two braided cables w/ loops and metal plugs on the end. You are supposed to use these to hang from joists or the ceiling. They work okay, but I am not too impressed w/ them.

Would I buy more - yes. If I felt I needed them.

Re: Question on LED light output

#5

Can't win.....

Barry Irby

The fixture looks good, I like the little reflector on it to direct the light downward, the price is the same as Costco and they are right up the street rather than across town. But, the website says the local HD has only ONE and I need four.

Wonder if they can be flush mounted? I can't use the chains where mine is going.

Re: Question on LED light output

#6

Re: Question on LED light output

Mark P

I replaced 8 4 foot T12 lights with 8 of the Costco 4 foot LED lights.

I now leave 2 of the units off. The increase in light output was dramatic.

They have been installed since last November and so far they are working perfectly.

I did find one DOA unit and took it back for an inconvenient but no hassle replacement.

Re: Question on LED light output

#7

Re: Can't win.....

Brian in SLO

I recently replaced all of my 4' fluorescent fixtures with the Costco LED's and have been thoroughly impressed. The chains that come with them weren't much and I opted to simply drill through the sheet metal to mount them directly to the ceiling joists. No problems and easy to mount.