It is that time again...
TomD
https://buildyourcnc.com/item/cnc-machine-greenHang-v1
http://www.leevalley.com/US/wood/page.aspx?p=72921&cat=51&ap=1
Knowledge You Can Build On — Est. 1998
It is that time again...
TomD
https://buildyourcnc.com/item/cnc-machine-greenHang-v1
http://www.leevalley.com/US/wood/page.aspx?p=72921&cat=51&ap=1
Haha
Jason Roehl in Lafayette, IN
The best part of the Lee Valley spoof tools are that some of them aren't THAT big of a stretch.
The ceiling-mounted CNC is obviously goofy, but it gets me to thinking...a planer could be ceiling-mounted on a swing-down arm...
Jason
Here is another *LINK*
terry quiram
Here is one from England.
Axminster
and another *LINK*
Jim DeLaney, Austintown, Ohio
https://www.duluthtrading.com/features/magnetic-work-pants-april.aspx?src=T15C055C2&ym_mid=1570606&ym_rid=243735&mboxSession=T15C055-999243735
Duluth
Re: It is that time again... *LINK*
Jim DeLaney, Austintown, Ohio
That product is actually available. Here's the real spoof:
http://www.leevalley.com/US/wood/page.aspx?p=72875&cat=1,230,41182,48944
Lee Valley
and yet another *LINK*
Jim DeLaney, Austintown, Ohio
http://blog.sketchup.com/sketchupdate/new-adventure-sketchup?mkt_tok=3RkMMJWWfF9wsRonvaTOZKXonjHpfsX66ukuWaG%2BlMI%2F0ER3fOvrPUfGjI4IScR0aPyQAgobGp5I5FEOTrXYX69qt6YJWg%3D%3D
Sketchup
Re: It is that time again...
Yonak
It's bad when you can't tell if a tool is meant to be serious or a joke.
Re: It is that time again...
William Duffield
To figure that out, I ask myself, "Is it more absurd than any of Woodpecker's One Time Tools?"
The new one from Lee Valley failed the test, so it's real. It's nice looking, I'm sure it works well, but I can't figure out what it will do that a story stick and a hand full of dividers won't do. An advantage of a story stick is that you can develop several of them for a project at a very reasonable cost, and if you screw up a part, you can still find the matching story stick to reproduce the part, even after you've measured and made several other parts. Drill a hole in each stick, run a loop of string through them, and hang the bundle on a peg. For a semi-complicated project, you might need a padded drawer full of their Marking and Transfer Tools, you can't write on them to tell them apart and they don't have hang holes. An advantage is that the wife would never mistake one for a paint stirrer or a piece of kindling.
Re: Hey diddle diddle, The cat and the fiddle…
William Duffield
http://apod.nasa.gov/apod/astropix.html
Re: It is that time again...
William Duffield
It's about time those CNC dudes caught up with the state of the art. Trim carpenters have been attaching their miter boxes and, later, chop saws to the ceiling for decades, for hanging crown mouldings. It significantly decreases wasted material from accidentally cutting the miters backwards or sideways.
That video is hilarious
GolfSteve in Calgary
Marking the tails (at 0:35) with a Sharpie cracked me up.
Torrefiing the handles in a BBQ (yes, that's we call them up here, not grills; I don't care what you think the proper name for the BBQ is) also cracked me up.
the "Fifty Shades of Black" footnote on the colour chart also cracked me up.
Re: It is that time again...
Mark Nowicki
When Veritas came out with the MkII Honing Guide I thought it was an April Fools joke. I believed that the colored dots were actual traffic lights.
I don't own one.
Mark
Awesome