Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

cherry tree limbs for spoon making

Posts

cherry tree limbs for spoon making

#1

cherry tree limbs for spoon making

Bruce Mack

I've made some spoons from dried wood. Now a friend, recipient of one of the spoons, has a newly cut cherry tree and is offering me some branches. I guess I'll put them on my deck covered with a tarp. I have a lot of reading to do I know and I don't want to impose my naivete on members of the forum. Will I screw up by putting the stash aside for 3-4 weeks?

Re: cherry tree limbs for spoon making

#2

Re: cherry tree limbs for spoon making

john Veerkamp

Cherry like other fruit woods tends to split when drying, If you can split it along the pith you should be ok, Painting the ends with Anchorseal will help also. Depending on the size this is all you need. It is a good idea to keep it out of direct sun.

Re: cherry tree limbs for spoon making

#3

Re: cherry tree limbs for spoon making

Dick Coers

I don't know where you live, but around here and depending on size of the limbs, I would anticipate loosing a lot to checking. For smaller limbs, get a froe and split in half. Split through the crotch sections from both directions so you harvest the built-in bend for ladles and bent spoons. Bigger limbs use some wedges. I prefer split wood for spoons and kitchen ware, but have used air dried as well.

Re: cherry tree limbs for spoon making

#4

Re: cherry tree limbs for spoon making

Bill Tindall, E.Tn.

Will I screw up by putting the stash aside for 3-4 weeks? ...no, keep shaded and cool as possible. 3-4 months? maybe

A more important question is whether the limbs will yield useful wood. Try them and let us know.

Re: cherry tree limbs for spoon making

#5

Re: cherry tree limbs for spoon making

Bruce Mack

Thanks folks. I live 25 miles west of Minneapolis, currently the Riviera of the upper midwest as we have had little snow this year. I'll get a froe to split the branches (rather have an axe but would probably maim myself) and probably a draw knife for the shaping.

Re: cherry tree limbs for spoon making

#6

A bandsaw would be real time saver.

Keith Newton

Sometimes the branches can have a lot of wild grain, and reaction wood, which ma y make for some hard carving, with hand tools.

Unless you can find the anchor seal easily, I'd recommend latex primer for the end-grain.

You are going to love carving green wood, since it will be about half as hard as dry of the same species, and Cherry is one of my favorites.

Re: cherry tree limbs for spoon making

#7

Re: cherry tree limbs for spoon making

Bruce Mack

Just wanted to provide followup. I split my first log on 5/9 with a newly acquired Fiskars X27 splitting axe. Not having a stump, I made one with 4x4 treated lumber, 12 16" timbers glued side to side with construction cement and stood on end. It works. Just began spoon making yesterday. The quarter segment split I'm working with is gnarly and has dried enough that it's no longer green woodworking. Locally grown Minnesota cherry is world class tough. Still I'm having fun with drawknife, gouges, hook knife, and bandsaw.