My son got his first buck last fall and has the antlers sitting in a box waiting for me to mount them on a wooden plaque---Any trick to doing this right? I was thinking that the stem sections that were part of the skull would need to get filled with something like epoxy - then a couple of screws through the back of the wood into the antler stem???
Years ago I had a mount like the one Bill shows except mine still had the fur over the skull section. What I did at the time was to cut out notches in both ends of a small cardboard box so the two antler beams would extend out and allow the skull piece to sit down into the box. I filled the box with Boraxo to the top so it covered the piece. I was told the borax would preserve the hide and to leave it for about a year in a cool place. When I removed the piece later the hide was intact. I simply placed it on a mount board and ran screws from the back into it. I didn't fill in the back with anything and the screws held just fine.