Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Any body help with auto body work/dent?

Posts

Any body help with auto body work/dent?

#1

Any body help with auto body work/dent?

Barry Irby

My Honda CRV is six months old. Somebody bumped in a parking lot in the snow, caving in the passenger side front door. Pardon the language, but it looks like an a$$ print. A dent doctor type guy did not want to tackle it. Body shop wants $1300. I don't want to turn it in on my insurance, but I might.

I could take the inner panel off and push it out. (my experience with that is the panel never goes back on as well as it is now.

If I could get it about 90% I woudl be happy. Really don't want a new door skin and fresh paint from the body shop. I suspect the paint will not match after a year or two. And, I can take to the body shop anytime and I don't think my fiddle with it will add anything to the cost of that repair.

What are the chances I can use my vacuum pump and build a caul(?) over it and pull the dent out?

Re: Any body help with auto body work/dent?

#2

Jack Guzman from Maine

Re: Any body help with auto body work/dent?

Jack Guzman from Maine

If you can get it out with vacuum all the power to you. However ,barring that,it shouldn't be difficult to remove that panel. Go to a dealer and ask. They should have a special tool for removing body clips without damaging them. If you bull it off you won't get it back on right. It's been a few years since I worked on cars and all manufacturers have different ways of doing things but mechanics do have to remove those panels to replace inner parts so someone knows how.---Jack

Re: Any body help with auto body work/dent?

#4

Re: Any body help with auto body work/dent?

Mark Nowicki

Go with the insurance.

Went through something similar with our 2014 Civic.

The bodyshop estimate was $3200, repair dented parts.

Insurance estimator specified replacement and estimated at $5800.

Mark

Re: Any body help with auto body work/dent?

#5

Re: Any body help with auto body work/dent?

Joe in a Cleveland suburb

Years ago, when I used to build and race cars in the SCCA, a friend had a Toyota with similar damage - right rear corner panel got pushed in. We thought we could just push it out from inside the car. Didn't work. Never looked right.

Sometime later an auto body guy told me it didn't/wouldn't work because the metal panel gets stretched/distorted when it got pushed in, so pushing it back out wouldn't work. I guess it takes special tools and knowledge. I have no idea.

My friend made the mistake of thinking I would know anything since I was racing cars at the time. I rarely worked on the cars, my brother (a mechanical engineer) did all the work. I just drove... :)

Re: Any body help with auto body work/dent?

#6

Kneale Brownson

Re: Any body help with auto body work/dent?

Kneale Brownson

Get a body and trim tool kit from almost any auto parts store. They're plastic-coated to reduce scratches. Find a Honda forum for tips on how to pull the panel.

You'll need something like http://tinyurl.com/nqeashx to get the "crack" of the dent flat again.

Re: Any body help with auto body work/dent?

#7

Re: Any body help with auto body work/dent?

Dick Coers

I've read of tricks like warming with a heat gun, then applying dry ice trying to shrink the metal. It's supposed to work on big dents that don't have a crease.

Re: Any body help with auto body work/dent?

#8

Re: Any body help with auto body work/dent?

Larry Clinton At Frankfort, (Central) Indiana

Insurance probably will cover it using comprehensive (less your deductible). As far as I know, comp. insurance does not go against your record and doesn't affect your rates. At least I know my insurance doesn't, as a few years ago we had a major ice / hail storm that damaged both of our vehicles. My insurance did me right and my rates did not raise. You may want to talk to your agent.

Re: Any body help with auto body work/dent?

#9

Re: Any body help with auto body work/dent?

Dustmaker Mike

If it is in the sheet metal, then I would use a deflated ball of some sort put it inside the door panel and inflate it until the dent pops out. Use a hairdryer to heat the skin. If a plastic piece a hairdryer and a little pop from behind should do the trick.

Re: Any body help with auto body work/dent?

#10

Re: Any body help with auto body work/dent?

Joseph Mulherin

I have to agree with Dustmaker Mike...try using a deflated football and maybe a deflated basket ball or soccor ball. At least give it a try and then decide on the insurance company agent offer. Also, you can get a suction device at the auto stores which you could use to pull from the outside as the ball inflates slowly. And touchup paints are available for your particular model and car.