3D CUTTING BOARD
Gordon Patnude
I am in the process of making a 3D cutting board, as shown in the video at the YouTube link <<https://www.youtube.com/watch?v=sGcQVRZGzsY>>
I have watched the video at least 3x thru and until today, thought I understood the process fairly well.
Cutting all the diamond shapes turned out to be not quite as simple as the video shows. I have the DOUBLE DUBBY from In-Line Industries and used his example of cutting multiple segments for bowl, but by not flipping the stock after each cut, the result is a diamond not a wedge. My stop slipped during the process of cutting the diamonds and I had to create a jig to hold each small diamond and process each one a second time in order to get them all to be identical.
I am at the point where I have cut and glued the diamond shapes into hexagons and now I am facing the task of gluing the hexagons together to make the board, but I need some suggestions because, the wood, being imperfect, and me, being more-so, resulted in hexagons that are not perfect.
So, here is my plea for help:
I need a reasonably simple but sure approach to fitting all these &^%!** hexagons together without gaps.
I have glue and plenty of clamps and am not really in a panic to finish, but would like to complete this project in less than a century, preferably by mid-March. It is a gift for my daughter.
Any and all suggestions will be greatly appreciated!!







