Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

just finished a taig frid chair

Posts

just finished a taig frid chair

#1

just finished a taig frid chair

McKay

I took a class from Chris Gochnour (FW contribu. editor) two weeks ago and just finished the chair yesterday and the clear coat today.



Really fun to do. Chris is a good instructor. He teaches at Salt Lake Community college, Adams and I am sure other places.



The chair is done completely with hand tools.

The dovetails are at a 9deg. angle and they kicked my backside some.



I have started to make jigs to make more for the house. I purchased an adjustable tenon cutter from Patrick Leach tools and also a spoke sharpener. I found that you are unable to do a straight tenon w/o the sharpener so I purchased that from Patrick also. Don't tell me to post this in the gallery because I have tried to register twice or three times and I think that I am too old to get it done correctly. javascript:insertTags(":\\");

Hope that you enjoy.

Re: just finished a taig frid chair

#2

Gallery

Mark Mandell - Gone Round In New Jersey

Do NOT post this in the gallery.

Take 1 (one)(Uno) new photo as a gallery image then contact one of several old people who have it figured out and one of us will walk you through the process.

:D

Re: just finished a taig frid chair

#3

Impressive


Re: just finished a taig frid chair

#4

Re: just finished a taig frid chair

TomD

I made one of these in cherry around 01. It has tapered tenons into the seat, which I think are a better idea, and no harder to do. I had the tools for tapered tenons after doing a Windsor chair thing around that time. They work in softwood, so I don't think they will ever split the hardwood.

Re: just finished a taig frid chair

#5

ebd

Beautiful!!!