Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Finishing

Posts

Finishing

#1

Finishing

David Frame

Hello All,

Does anyone out there finish their woodwork before it is assembled? I'm mainly referring to the interior of cabinets and the like.

Thanks

Re: Finishing

#2

BTDT

Mark Mandell - Gone Round In New Jersey

But I don't do much interior finishing on cabs beyond a coat of shellac to control dust in the interior. As I make the carcase out of ply, I tape off the glue joint areas and the mist on a coat of 2 lb. cut the shellac with the box saides laid out flat. I then peel the tape while the shellac is dry but still soft. Makes removal of glue-squeeze a simple wipe with damp cloth with no glue staining. If doing M&T joints, I wrap the tenons with tape and stuff the mortices with some paper to protect the glue surfaces.

Outside finishing can usually wait until after assembly.

Re: Finishing

#3

Re: Finishing

Bill Tindall, E.Tn.

stay tuned for Spice box update for answer and details

Re: Finishing

#4

OTOH

Mark Mandell - Gone Round In New Jersey

When doing AV cabs, I prefer to turn the interior into a "negative space" to allow the components to float in a void. Thus the interior is finished in several coats of flat black paint

and then those ares are masked when the piece is put together and finished