I'm working on pricing a couple of cabinets that need to look like they came to Arkansas around 1820, and need to find suitable hardware, hinges, pulls and key lock. Not really fancy, but not cheap looking either.
I was hoping someone had a bit more knowledge or link than just a company that sells everything from the beginning of time up until now, but would provide a link for just something from around that 1820 timeframe, nothing later than that.
What hinge, pull, and lock would you choose for a period piece?
My client showed me a reproduction piece that had Chippendale hardware, which could have been as early as 1762, but I'm not sure if that would have been making it into this part of the country before Arkansas became a state. It might have, but just doesn't seem like what I would envision for early settlers.
Most of the early settlers here were from Eastern states like Alabama, from families who had already been here for generations, so I would suspect their belongings were probably more practical, not dripping with ormolu mounts, and probably made somewhere back East.
I'm just trying to plug something into a bid now, and will take more time later, so don't anybody bother with this. I just thought some of you might have recently done a piece from around then that had found something nice but simple.
I don't know, but, if I had the problem I would be looking in my books of Period Furniture to see what was on 1820 pieces. Or if I lived where I could find an experienced antique dealer I would ask them. Or call Ball and Ball or Horton Brasses or.......there is a hardware place outside Lancaster PA. Associated with it is a shop that does high end restoration/conservation, like for Sotheby's, etc. Their hardware is made from casts of stuff that comes through the shop so it is authentic. Warren on the Hand Tool side will know that name of this place. It is by a farm house north of Lancaster. I have been there but can't recall their name. Nice folds to deal with though and they know antiques and hardware.
I think the name of the place near Lancaster is Londonary Brass, but confirm with Warren on the Hand Tools as he lives there and will know. The folks at this place, Horton or Ball and Ball are going to know what was on 1820 furniture.
It will not be cheap. Whitechapel with be least expensive if you ask for a professional shop discount price list.
Arkansas had just become a Territory on the United States in 1820. It was granted Territorial status in 1819. Prior to that time it was part of the Louisiana Purchase which occurred in 1803. Statehood was conferred on the Arkansas Territory on 1836. The population of the Arkansas Territory was principally Native American. Colonization by settlers from the East began slowly in about 1810 and picked up a little around 1820. It didn't get rolling in ernest until Arkansas became a state. Even then Native Americans remained the majority for a while.
I think the answer to your question is that there was no style of furniture or hardware that one could associate with Arkansas in the 1820s. The furniture there was whatever the settlers brought with them and depended on where the settlers came from and their economic status. My guess is that you could pick just about any style of furniture and hardware that was found in 1820 and you'd be in the ballpark. I doubt that many rich folks from Charleston or Philadelphia migrated to Arkansas in the 1820s, so high style, expensive brasses were probably scarce; but just about any utilitarian hardware found then would fit the bill nicely.
Probably the definitive book on the subject of Federal Period furniture (or at least the first one I would look in) is American Furniture. The Federal Period in the Henry Francis Du Pont Winterthur Museum, by Charles F. Montgomery. However, as Hank warns, it is strongly biased towards high end pieces, atypical of what you would expect to be found in Arkansas at the time.
I don't exactly see any hardware listed anywhere by era. I'll just plug in a number my estimate for now.
During the night, in my dreams, or semi awake time, it dawned on me that I know all the local history museum curators, that I can pick their brains, and maybe sources.
call any of the hardware vendors listed who will know what hardware goes with what period.
The hardware price is going to depend vastly more on where you buy it and what style it is than the Period the style comes from. Bright brass hardware from Ball and Ball for a chest of drawers could be several hundred dollars and greatly less for approximately the same shape from Lee Valley (for example)
I don't have much to add directly to your request. What follows is step one, only in American Furniture to 1820. I have no direct solution to hardware manufacturers but I‘ve come up with a few resources to identify styles. American Antique Furniture—Joseph T Butler. Shows furniture style illustrations and dates of making -- Chippendale, Federal, Shaker, Empire, Germanic, Queen Anne and Winsor all appear in range 1800 to 1820. No drawings but illustrations of furniture. If I haven't lost you yet.... Step two
Other sources of pictures where furniture identified by date/period where you can look to the furniture styles above as American via photo examples “American Furniture 1620 to Present” (published in1981) by Johnathan Fairbanks and Elizabeth Bates; “Antique Country Furniture of North America”, John G.Shea; “American Painted Furniture 1660-1880”, Dean A Fales; “Four Centuries of American Furniture”, Oscar Fitzgerald; “Antique Hunter’s Guide to American Furniture”, Wlliam Ketchum, Jr. Also works within Wallace Nutting “Furniture Treasury”; “Directory of Antique Furniture” F. Lewis Hinkley. Shaker examples are by Kassay, Reiman, Sprigg, Larkin, Burk, and others “Country Pine Furniture” Constance King; “Measured Shop Drawings” Thomas Moser; Step three....Once observed in the age and style of furniture correct photos, the hardware companies mentioned by the responses in this thread should get you to similar hardware of where and what you want for the build.
Aside of the hardware manufacturers mentioned above, Ives makes some nice cast hardware, P.E. Guerin, Bona did a few years ago. House of Antique Hardware makes some items – especially latches. Williamsburg Blacksmith and Trapper Peak make some iron stuff too (much of it looks modern to me though). Should you want iron parts that can be turned into something (rosettes, brackets, balls, rings, scrolls) King Architectural Metals might help. Addotional: NOT American but could be used as an example "Millers' Pine and Country Furniture Buyer's Guide. Mostly Irish and German chests, cupboards, cabinets, many in color. These show many wood pulls, knobs. with some brass, and iron. Lastly, you might try the Bartley Collection factory in Maryland also. They were nice to me the one time I called.
Two samples of I believe are age appropriate hardware. One is legitimate 1820 pine table with original brass turned hardware. It came from South Carolina and spent time with several generations of caretakers in Pittsburgh. Two is a cherry reproduction wall mounted cabinet built from photos taken from a home in Fredricksburg, Virginia. All I can say is that the original (Mahogany) of number two is pre civil war. The hardware came from Whitechapel.