Look what a blacksmith friend gave me
JL
That's a 16" square above it.
Knowledge You Can Build On — Est. 1998
Look what a blacksmith friend gave me
JL
That's a 16" square above it.
Re: Look what a blacksmith friend gave me
Philip Duffy
Wow, you are a lucky guy to have a friend like that! P.
I have no idea what it is
Ditto...
Re: Look what a blacksmith friend gave me
Joseph Mulherin, sr
My interpretation is that it is a spoke shave, and a leveling cutter before they had planes.
Drawknife?
Indeed, a drawknife
JL
Mea culpa. I have used them for so long, I didn't think about it.
Are two edges sharpened?
Dick Coers
It still doesn't make sense to me, never saw one with two surfaces between handles. Are they slightly flexible? They seem undersized compared to the wide blades I have.
????
Jack Guzman from Maine
I don't see the difficulty people are having with this. What I see is a drawknife.period. What you are seeing is the bevel side,edge down. It is laying on the flat side.I am puzzled by all the comments.Nicely made btw.---Jack
Re: Are two edges sharpened?
JL
The darker portion is thick, about 1/4" or so. The bevel of course tapers to an edge.
Most of my drawknives are similar.
Re: ????
Barry Irby
I thought it was a draw knife also, but I wondered about the handles. Are they loose and can they be re positioned , perhaps by loosening the nuts on the handles? I am not looking at one now, but as I recall, The handles were installed on tangs forged onto the ends of the blade.
Re: ????
JL
Yes, you can actually vary the positions of the handles by loosening the nuts. I have now adjusted it so it is more comfortable to me.
Re: ????
Dick Coers
When I looked at the picture, my eye saw that dark section as a hollow. I thought I was looking at two pieces of steel, combining into the section that went into the handles. Honest, I thought it had two edges or something! I haven't ordered those new glasses yet, guess I really need them!
still flummoxed
Bill Tindall, E.Tn.
This picture must be like those that seem like a random pattern and then something pops into view. I have new glasses and I still see "two" pieces of metal and no hint of a draw shave. Where is the sharp edge and what is the dark place?
Re: still flummoxed
Sgian Dubh
The sharp edge is facing the bottom of the picture Bill, and it's silver coloured (shiny), transitioning into black at the 'lumpy' end of the bevel. The face (or flat) side of the knife rests on the two pieces of wood. In use, I'd probably have it flipped the other way up most of the time. However, like you, the image foxed me at first and it took me a reasonable number of seconds to twig what I was looking at and how it was orientated, ha, ha. It was the fact that there's a slim silver band at the far side of the knife towards the top of the picture that threw me - not sure why though really. Slainte.
only a bit less flummoxed
Bill Tindall, E.Tn.
"It was the fact that there's a slim silver band at the far side of the knife towards the top of the picture that threw me"...me too, and still does.
Mr. Escher would love it.
The only way I "saw it" was to block most of the picture with my hands and just look at a small section of the blade.
That turned out to be an interesting experiment in how my screwed up brain interprets what is focused on my retina.
Pretty Cool-Nice Friend!
Don Orr
I'm curious about the handle mounting. Are the ends of the blade round? Could the blade rotate in the handles while in use if not tight enough? Would some sort of registration of blade/tang(?) onto the handle be of any use to keep everything more rigid and prevent rotation?
It looks very well made and solid and an inventive design. Test drive it yet?
Re: Look what a blacksmith friend gave me
Larry Barrett
Here are some photos of a similar drawknife, this one made by James Swan. The handle adjustment is known as the Nobel patent.


Re: Pretty Cool-Nice Friend!
JL
The ends of the blades are round. I can adjust the handles.
Re: Pretty Cool-Nice Friend!
Rum
Looks very nice indeed!
Also wondering about the handles - in use they don't rotate at all on their own? That would be my main concern with them being round like that although I don't know how much of a problem it would be in practice (possibly none).
Re: Look what a blacksmith friend gave me
Jseph Mulherin, sr
What I meant to say was that they used this knife in the olden days before they had planes as such as we use today. They would hew a log to get the boards sliced from the log, then shave the sides of the boards hewed to get a smooth face. The handles would have been lowered a bit to get the blade to cut into the wood....the upper face of the tool would have a flat surface to ride on the smoothed out face.
Just my interpretation...
Re: Look what a blacksmith friend gave me
Jseph Mulherin, sr
JL, have your blacksmith friend come on here and explain his interpretation of the tool....the rest of us are just poking holes in the fog......
Re: Look what a blacksmith friend gave me
Keith Newton
That looks new, in that I don't see any dings anywhere. Did your friend make it?
Also, judging by the thickness of the tangs, and length of the bevel, it looks like it would have a pretty wide sharpness angle. Have you checked that, and compared it to others?
Re: Look what a blacksmith friend gave me
John Lucas
Pretty cool JL. I haven't built a drawknife yet. I have 2 that I use. They came from grandfathers on both sides of the family. I have 2 more, one without a handle. I will eventually recondition those 2. I'm going to be without my shop for about a month but may have a place to put my shaving horse so I might get started on the next Windsor chair. I can do that with almost no tools if I don't accidentally pack them.
Re: Look what a blacksmith friend gave me
Jseph Mulherin, sr
I watched Mike Rowe on Dirty Jobs last evening using exactly that style of draw knife on the removal of the bark on some logs being used in a log home.