Jointer
Larry
I'm looking to buy a new 8" Jointer.
What make? Jet, Grizzly, Delta, Powermatic, or ?
Thanks. Larry
Knowledge You Can Build On — Est. 1998
Jointer
Larry
I'm looking to buy a new 8" Jointer.
What make? Jet, Grizzly, Delta, Powermatic, or ?
Thanks. Larry
Re: Jointer
Randy Stukenberg
I have an old Delta DP20 8" and really like it. Whatever you get, get a spiral Shelix head for it. Amazing.
Re: Jointer
Dick Coers
Delta has developed a recent problem with parts availability, well for the last couple years anyway. Grizzly machines are hit or miss. Folks seem to love them or hate them. I'm in the hate them camp. So if you are shopping for new, it's Jet or Powermatic as far as I am concerned.
Re: Jointer
Ray Carson - Lawrenville, NJ
I have a used Jet JJ-6CSX, but would not be opposed to Grizzly since I own several of their other machines and have had no major issues.
Ray
Re: Jointer
CJ in MPLS
Larry:
Out of curiosity, how close to Minneapolis are you? I'm considering getting rid of an 8" Delta jointer (1960's vintage).
CJ
Re: Jointer
Chuck Kettler
I bought a General years back, 8". Good deal for me and good performance.
Re: Jointer
John McGaw
He is roughly 2065 driving miles away, give or take.
Re: Jointer
CJ in MPLS
Oh. Good. I was worried he would be too far away. It's not like he is 2100 miles away or anything. 
CJ
Re: Jointer *LINK*
mdclor
I have a G0490X and like it a lot. It does a great job with qswo and bubinga in terms of minimal tear out; it is relatively quiet; I haven't changed the cutting faces in ~6 years; the bed is easy to adjust by lifting or lowering a lever. I have found Grizzly tools to be a good value.
If you happen to be within reasonable driving of one of there showrooms, they have a scratch & dent sale once or twice a year where you can get some really good deals as I understand it. There are also some 10% off coupons to be found once in a while. HTH
G0490X
Re: Jointer
don stephan
Really like my long bed (PM).
Re: Jointer
Larry Clinton At Frankfort, (Central) Indiana
I have a mix of brands in my shop, Delta Unisaw, Mini-max Band Saw, Powermatic lathe and Drill press, Grizzly jointer, Shop Craft 20" planer, etc. In my opinion the Grizzly equipment is better than the current Asian imports from the likes of Powermatic and Delta. I have had very few problems with Grizzly and they have been great about responding. My 8" Grizzly jointer has the carbide inserted spiral cutter head and produces as nice a finish as the Byrd head in my planer. I purchased the 8" jointer to replace an old (10~15 year) 6" Grizzly joiner. It did its job well for all the years I owned the unit. I checked the flatness and parallelism of my 8" and it is very good (>.002"), the machine is very easy to adjust and holds setting well. The fit and finish is superior to my new Powermatic $1,000+ drill press.
Re: Jointer
Paul Blackwell
When I moved three years ago, I sold my Grizzly 8" jointer as it was too heavy to lug down the stairs to my new basement shop. I replaced it with a 6" Grizzly with spiral head and replaceable carbide inserts. It produces the best finish I've ever achieved with a jointer. Virtually no sanding required. Very happy with it.
Easy to adjust and holds settings.