Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Any one ever tried one of these? *LINK*

Posts

Any one ever tried one of these? *LINK*

#1

Any one ever tried one of these? *LINK*

Gary Smyth

Not sure of the end product or use/value, but for those making desks, kitchen silverware dividers, jewelry boxes, tea caddys - even spice racks/cabinets I wonder if this is a suitable time saver for the price.

Anyone know the thickness and length range of larger drum/belt sanders like Performax and others?


http://www.micromark.com/microlux-drum-thickness-sander,8599.html?ns_md=Email&ns_sc=Marketing&ns_cn=15WS05R&ns_pc=15WS05R&utm_source=Marketing&utm_medium=Email&utm_campaign=15WS05R

Re: Any one ever tried one of these? *LINK*

#2

Re: Any one ever tried one of these?

Dick Coers

With a 2" diameter drum and a very narrow width, the sandpaper is really going to wear quickly. As with other MicroMark, it's just considered a scale model sized machine. Something for building ships models, or doll houses.

Re: Any one ever tried one of these? *LINK*

#3

Re: Any one ever tried one of these?

Grant in Iowa

Gary,

I can't speak to the unit you are asking about, but I can tell you that my Supermax Shoppro 25 can handle thicknesses from 4" down to 1/32". I bought mine at an estate sale for about a third of new price, and got several boxes of sandpaper in the deal. Having had and used it for about three years, I don't think I'd want to do without it now. I can now thickness,surface, and smooth highly figured woods without the tearout of a planer.

It takes a good deal of time to learn what these machines are capable of, and what their limitations are. They are NOT planers, but with the right touch they can act as one for a user with the right amount of patience. If you get some heavy grit paper, and feed judiciously, they can stand in as one when a board is figured or too wide for a planer. Given a stiff carrier board and some shims, they can act as a jointer for board face work.

I have owned a Jet 10-20 drum sander before I upgraded. It was a nice machine, and perhaps competition for what you are looking at now, albeit a bit larger and more expensive. Mine lacked the in and out feed tables, which aren't standard. I think it would go down to around 1/16" thick, perhaps thinner with a carrier board, if memory serves. For me it didn't have enough width capacity, as I wanted to work wide natural edge boards. Other than that, it was a decent machine.

Let us know what you are hoping to do, and we can give a more targeted answer.

Regards,

Grant in Iowa

Re: Any one ever tried one of these? *LINK*

#4

Re: Any one ever tried one of these?

mdclor

Gary, I have a Delta 1836 drum sander. It will sand as short as about 9" and as thin as 1/8" (maybe less, but I haven't tried) with a carrier board under it.

Re: Any one ever tried one of these? *LINK*

#5

Thanks. I'm looking elsewhere


Re: Any one ever tried one of these? *LINK*

#6

ebd

Re: Thanks. I'm looking elsewhere

ebd

Hint: I searched Craig's List daily for a fair amount of time. I finally scored a really nice planer that only needed some cleanup, adjustments, and a little minor work for $50. It has 6" thick and 13"wide capacity. Also has the column lock.

Were I you I'd be checking CL several times a day. I missed a number of really great deals (a DeWalt 734 for $100) because someone else beat me to it.