Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

OT Sandblasting large things

Posts

OT Sandblasting large things

#1

OT Sandblasting large things

Dustmaker Mike

Well I hooked up my sandblasting cabinet this weekend so I can do all the small parts on my 68 Mustang I am restoring. So now on to the bigger stuff. I will have the car body on a rotisserie in my attached garage so I can get to the bottom etc. I am planing on sandblasting the entire car inside out side. I have a small pressure sandblaster to work with, when I did a little of this in the fall in my driveway it was well nasty. I want to make a plastic wall to put around the area I am working on.

I figure I had better ask stupid question among friends first before I go off and ask someplace that nobody know your name(_;

What mil plastic should I use?

Will a small bathroom fan with filters be enough to keep the dust cloud down?

Any ideas to help me out so I don't destroy the house.

Thanks Mike

Re: OT Sandblasting large things

#2

only if your bathroom fan is 2' dia. and 2 hp

Dick Coers

This will be a cloud of dust like you can't imagine. You better have an air supplied mask that has the inlet in the next county if you plan on using a bathroom fan for ventilation. Ever seen those industrial sandblasters at work? Those guys look like they could either dive for treasure, or sandblast! Your going to find sand in cracks in your garage for the rest of your life. I'd put that car on a trailer and take it to a professional. It will be money WELL SPENT! Also consider that you could burn up your compressor doing this as well. Ever run that compressor with wide open outlet for 6 hours? That will be what you will need to do. Consider the cost of media, air supplied mask, wear on the compressor, trip or two to the eye doctor to remove junk from your eyes, etc.... Makes the professional much more reasonable. How you going to get rid of all that media full of rust and old paint?

Re: OT Sandblasting large things

#3

Re: only if your bathroom fan is 2' dia. and 2 hp

robbcarr

>>> I'd put that car on a trailer and take it to a professional.

Re: OT Sandblasting large things

#4

Re: only if your bathroom fan is 2' dia. and 2 hp

robbcarr

-- I'd put that car on a trailer and take it to a professional. --

Unless you're going to invest the resources to made a proper place to sandblast I think this is good advice....and I'm a do-it-yourself kind of guy.

Re: OT Sandblasting large things

#5

Re: OT Sandblasting large things

Joseph Mulherin, sr

Mike, go on YouTube and ask about car sand blasting in the Search window. Up will come many videos showing various methods. Also, there is a company that will bring their compressor and blaster equipment, and one that does a water sand blasting and there is no dust to contend with. Doing that job is not what you are equipped to do....leave it to professionals....and stay on woodworking......lol

Re: OT Sandblasting large things

#6

You may want to do more research on sand

DONinSTL

I became interested in auto refinishing in the early 60's, while in high school and over the years did quite a few projects. At that time, I was told by professionals that the sheet metal was too thin to sand blast. The air pressure has to be at a minimum level in order for the sand to blast away the finish and at that pressure, the panels will become distorted. I was told this in regard to wanting to blast my 1953 Chevy, which I will guarantee had heavier metal than your newer Mustang. While the "dustless" glass method looks interesting, I doubt that sand has changed.

Re: OT Sandblasting large things

#7

Hum

Dustmaker Mike

I will look into a pro to do the job. My idea was to do sections at a time, not the entire body at once. Thanks

Re: OT Sandblasting large things

#8

Re: Hum

Joseph Mulherin, sr

To get away from distorting and diminishing the original metal material try looking into the SODA blasting....

you can also use it with water to hold down the dust from the soda if wanted. Leaves a very smooth surface.

Re: OT Sandblasting large things

#9

Re: You may want to do more research on sand

Joseph Mulherin, sr

Yes, Don, the methods have changed. Now the dustless blasting using a very refined glass grains and water to keep it clean and dustless. Watch some YouTube on it.

Re: OT Sandblasting large things

#10

Re: You may want to do more research on sand

Dustmaker Mike

I have been watching and learning over the last few months about it. The material I am using now really does not toss off a lot of dust. From the cabinet I run into a 5 gallon bucket with about 2 inches of water in it. I then hook up the smallest shop vac I have to it and run the pipe from it to about 1/2 inch above the level of the water. The other side I hook up to my cabinet. No dust in the shop vac and the water in the bucket turns really black. I figured I could do the same thing around sections of the car with plastic sheeting to make a cabinet sort of. For the doors and the front fenders I will make a big plastic box hookup a bigger shop vac or bathroom fan and filter along with a water separator. I have checked into having it done by a Pro but I really can't afford it at this time. So that is why I am doing as much as I can my self. One small section at a time I am in no hurry. Thanks Mike

Re: OT Sandblasting large things

#11

Re: You may want to do more research on sand

Joseph Mulherin, sr

Mike, what ever method you use...sand or soda...wear the protection equipment...safety glasses that fit close to the head, hearing protection for the compressor noise, and the respirator for the nose and mouth.

You don't want to come up medical problems in the future from just doing your hobbies now.

i bought a 50lb soda blaster from HF last year and the safety equipment....but haven't used them yet.

Mean to redo my paint on my used Subaru Forester this year and repaint myself using spray cans I already have bought thru Amazon. In my younger years I painted nine cars using the old spray guns we had at that time....before the HVLP guns we have now.

Re: OT Sandblasting large things

#12

Thanks

Dustmaker Mike

I am not sure yet if I am painting it or not yet. I am taken an auto body repair course at the local HS adult ed. The instructor is a great guy and says it is not that hard to paint it. The HS has a paint booth all set up to do this kind of work. So I will get the work done and then see if I am up to toss some paint on it. I do want to do everything I can because it is fun. I have also restored a few cars a long time ago and got brave enough to even paint one. Well if I paint this one I hope it comes out better then that one.

Re: OT Sandblasting large things

#13

Re: Thanks

Joseph Mulherin, sr

Question: do you have one of those new HVLP guns? I bought a new one from HF and there are some things you should do BEFORE operation of one. It is made in China and they used some silicone instead of gaskets in places which needs cleaning out good.

A rememberance: the best car i painted was a 1976 Alfa Romeo. It has battery in the right rear fender.

The car had been in a accident and the battery got ruptured causing it to eat out the fender. I got some cloth and fiberglass and put three layers of the cloth on it, then sanded till smooth and undetectable, then primed the fender with a rust colored primer, then used my old fashioned paint gun to spray the entire car

an INTERNATIONAL ORANGE.....yea...orange....and when the car was standing at the curb the paint looked wet enough to run off the car......best paint job I ever did.

When and if you wish to start painting, setup with a cheap paint and use it on some small item....say 2'x4'

and get the sideways hand motion and trigger action properly to you. And make sure the spray is vertically larger than the horozontal. Stay away from the surface of the item being painted about 10-12" and do the arm motion and trigger action until you feel good enough to tackle you car.

And yes. painting is a lot of fun....just like woodworking.

y in the right rear fender, and the car was in an accident and the b

Re: OT Sandblasting large things

#14

SOme tools I buy the good stuff

Dustmaker Mike

if I figure I am going to paint it I will buy a good gun I figure that will be worth the investment. I will be priming it at home with the epoxy primer then they say a 2K primer so I can sand it smooth. I figure I will have the most practice on the bottom and under the headliner cause no one will ever see those areas.

and international orange I bet that was bright.

Re: OT Sandblasting large things

#15

Re: SOme tools I buy the good stuff

Joseph Mulherin, sr

Mike, I know you said you were going to sand blast, but consider the 40lb. soda blaster at HF.

Soda blasting leaves a very smooth surface while sand leaves a rough one....and wears away the metal while sanding....not with soda. Just a hint

Re: OT Sandblasting large things

#16

I will

Dustmaker Mike

I have been looking into that as well. There is a small converter to attach to you sand blaster to use soda. This is the way I was thinking of going that way I have the best of both worlds.

Re: OT Sandblasting large things

#17

Be careful with 2k

Dick Coers

Used to be dangerous stuff when it had isocyanates, but maybe new formulations don't have that and aren't as bad. Called for air supplied mask, tyvek suits, and eye protection then. I'm trying to remember, but I think it was a reaction to moisture of those body parts? Anyway, please read the MSDS, and talk to the neighbors. They are going to smell you working!

Re: OT Sandblasting large things

#18

Re: Be careful with 2k

Dustmaker Mike

I will be careful when spraying any paint. I am pretty sure I will be doing almost all of it in a certified paint booth. I may spray small stuff in my garage but the large stuff I don't have nor am I going to buy the equipment to do it. I just want to do most of the prep work at home like strip the paint get rid of the rust etc.

Thanks