Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Pros

Posts

Pros

#1

Pros

TomD

We have a certain amount of discussion about what the pro opinion is around here, and what it means. Currently I am measuring up my daughter for online glasses, and you have to make some guestimates as to what is what. This would be an ideal situation for using a pro, but...

I just went through this with my mother, who can't see through her glasses to drive. Part of the problem seems to be that the glasses are too high on her head, and she is forced to look through the bifocal component. I got her talked around to driving glasses, but she was getting here graduated lenses anyway, so I sat in on the fitting. Like most Optometrists, the fitting is done by an assistant, a very smart and energetic individual who is, like 6'6". No idea but she was taller than me at 73 inches. So she has a number of machines to run my mom through, that go beep when the result is done. Then she measures her for the vertical centre of the lenses. They are sitting opposite each other, and the technician scrunches down to be at the same level as my 62" mother. She is at least 4 inches over 4 feet taller when she takes the measurement. Therefore the lenses are going to be ground with the papillary center a good deal high.

So in the real world, pros with thousands of dollars of gear and decades of training should get better results than old carpenter/shooters, but you can't actually count on it. It should be a shortcut to send your numbers to China, but at the end of the day it may not be.

Re: Pros

#2

Re: Pros

mdclor

Tom, LOML ordered glasses online last fall and is quite happy with them. I was surprised since this is her first pair of glasses so she didn't even have the numbers indicating the various dimensions. Anyhow, they had us take a pic with her holding a CD in front of her chin and email it to them. As I understand it, the CD is a reference guide used to determine the critical dimensions so we didn't have to supply and data other than the pic. FWIW

Re: Pros

#3

Re: Pros

Barry Irby

I just went through this for myself. What a .....joke???? The whole process is frustrating. None of the people involved seem to listen or at least to pay any attention to anything I had to say. My glasses must be strong. (Over 8, whatever that is) Because they are over eight, I can't buy them from places like Costco. Apparently they don't want to deal with people that really need glasses. Started saying things like "Oh!, You have special Eyes." As if I were six.

I insisted I wanted them to make the glasses as light as possible. Picked a frame with small lenses. They sent the glasses back with a different frame that was much larger and heavier. They tried to convince me that was what I ordered, but I had taken a picture of the tag on the frame. They made a new set, but got confused and put them in exactly the same frame. They made a third set that were smaller and lighter, but still not in the frame I ordered. I gave up and accepted them. Over $550. Does not inspire much confidence.

Don't get me going on the BS they told me about how bigger lenses were lighter. Or how the frames with the metal edges rather than the nylon strings would be lighter because the lenses would be thinner. Not. Where are the pro's?

I want to order a set from China, but have never screwed up my courage to the sticking point. OTOH, couldn't be much worse.

Re: Pros

#4

Pros??

paul in AZ

Tom, you make a fundamental mistake in thinking that some chickadee in an optometrist's store that thinks she knows how to run a machine is a real pro.

Eyesight is so critical that I think it is worth spending a couple of bucks extra to have an ophthalmologist do the testing and prescribing.