Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

OT- Gas Dryer conversion

Posts

OT- Gas Dryer conversion

#1

OT- Gas Dryer conversion

Tom

I have a gas dryer that is currently set up for LP gas.I am switching to NG. Has anyone done this conversion? Is it just a matter of changing the orifice?

Thanks

Re: OT- Gas Dryer conversion

#2

Re: OT- Gas Dryer conversion

David Yoho

It might be all you have to do but it would probably be better to either get the gas company to do it or a qualified gas appliance serviceman. Years ago when we converted a gas water heater from propane to natural gas the natural gas folks came out at no cost. It seems like there was a little bit more involved than just replacing the orifice but that was a long time ago and I don't totally remember. It could be a simple DIY job but with gas involved wouldn't you really rather be safe than sorry?

Re: OT- Gas Dryer conversion

#3

what he said NM


Re: OT- Gas Dryer conversion

#4

Re: OT- Gas Dryer conversion

Keith Newton

You may need to adjust the little air gates to get the flame right. I'm sure you can find a site to describe what it should look like.

Re: OT- Gas Dryer conversion

#5

Re: OT- Gas Dryer conversion

Gary Bindel

You also need to change the pressure regulator. Propane operates at about 11"WC, NG at 3.5" WC