Sliding QS oak garage/shop doors finished
cameron
I finally finished rebuilding the front of my shop (rot, termites and poor construction) and making/installing the new sliding doors. Quartersawn white oak with 1 3/4" rails/stiles and 3/4" flat panels, finished with 4-5 coats of z spar flagship marine varnish. These are some heavy doors. I'm now waiting for my handles to come in the mail and have to put end caps on the slide hardware cover. The upper pine will get painted in the spring and I'm still debating on whether to paint the cedar to match the house, I may cry with the 1st brush stroke (historic district victorian brick with green fishscale shingles and white trim...) Now if the contractor would just finish the retaining wall this place would look respectable and my neighbors would stop the death threats. (apparently the neighborhood like the doors though since I've had ~10 people stop by to look at them...) Sorry about the scrap plywood, I should have removed that before snapping the shot but it was raining.



