Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Why I like a planer

Posts

Why I like a planer

#1

Why I like a planer

John Lucas

First of all I love my jointer. Flat true boards are where it's at. I nust upgraded to a steel city granite bed spiral head jointer. Wish i had done that years ago. What a difference.

That being said early on in my woodworking I realized that I didnt like building things with lumber of the dimensions that you can easily buy. I did a lot of smaller projects a d they just looked better with thinner lumber.

For may of my larger projects 1" or 1 1/4" just looks better than 1 1/2 Even now since I do mostly woodturning now but I still do lots of projects that require glue ups that require true flat boards and even then I will often thickness them to smaller sizes. I couldn't live without those two tools.

Re: Why I like a planer

#2

Re: Why I like a planer

don stephan

For my two cents, one of the shortcomings of biscuits, dominos, and similar is the implication that it's okay to use boards with slight warping, because the inserts will solve alignment issues.

Whether or not biscuits/dominos are incorporated, gluing together warped boards that can be pulled flat with clamps is incorporating stresses into the finished product. Those stresses may never manifest themselves, but they might in a table that doesn't sit flat on all four legs, a twisted cabinet door frame, a top that splits, or in some other way. The boards will always try to return to their resting warped state.

Re: Why I like a planer

#3

Re: Why I like a planer

ChuckInND

Personally, I don't understand Steel City's decision to go with mostly granite top machines, but then again I don't understand Delta's decisions since they have sold out numberous times, and each time getting worse. I've never used a jointer, but I sure use a thickness planer alot. I'm sure that a spiral head cutter would be really nice to have, but economically it doesn't work for me, I can't afford much right now. I don't consider myself as a fine furniture maker, and I probably never will be.

Re: Why I like a planer

#4

Re: Why I like a planer

David Yoho

I'm in the same boat as you. Earlier in my woodworking career I depended on buying furniture grade hardwoods that were S2S. At the time all I had was a 6-inch jointer with short beds. I was able to dress the edges but quickly became annoyed at the 13/16 thickness as well as the boards not being flat and true. I was paying what I thought was a premium for this and decided things needed to change.

I added a 12-inch Delta lunchbox planer, which helped. Then I replaced the 12-inch with Delta's two-speed 13-inch and the old jointer with an eight-inch Delta Professional model. The beds are like having an aircraft carrier in the shop. I replaced the standard cutterhead with a Byrd Shelix and started buying rough lumber whenever possible.

I love being able to dress rough stock to an exact thickness and know it's flat and true. The Byrd cutter and the high speed of my planer make it possible to dress figured lumber without tearing it up. I've mostly built fine furniture and couldn't imagine doing it without either machine.

Re: Why I like a planer

#5

Re: Why I like a planer

James Heaston

I have the Jet JJP12 & love it. Having a 12" jointer is awesome!

Maybe someday I'll splurge for a spiral cutter head.

Re: Why I like a planer

#6

Re: Why I like a planer

TomD

I wouldn't say I know why SC did it with the granite, but if it works, I think it is a great idea. What I mean by "if it works" is that I wouldn't have known off the top that the material would be supported and yet allow some of the finer details to be strong enough. But since it seems they can there are a lot of advantages.

In a lot of ways it is probably cheaper. If you look at the cost of granite surface plates of Taiwan quality you can get a fairly large pieces, larger than most bandsaw tables or wheels would require for about 30 dollars retail. Using cast is tough, few people think the Asian castings are any good, even on very expensive machines they sometimes just snap off. But god made the granite, and his work is pretty good. Tough to really mess it up.

Granite has that luxury reputation at the moment, and all you do is grind it, no arcane seasoning

One of the things that appeals to me the most is that many hobby tools either live in badly heated places, or end up there for a while before they find their next owner. I found a great deal on Inca tools, but it had rusted in many places, in only the short period the previous owner was sick, and then the few months to sell them. Of course Inca is aluminum so there are a lot of other bits and pieces that can be the problem when condensation gets to work. I have had several saws that got ruined with condensation, like when an overhead pipe that had never sweated, one year up and does. it's nice to have a table that isn't affected by such things.

Weight has it's place, overall I am more for light weight stuff, like Inca. But there are many people who like the weight, and granite has that.

Finally, it was something new. There are so many copy cat tools out there, we already have all that stuff.