Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Coffee filters to strain Water based Poly?

Posts

Coffee filters to strain Water based Poly?

#1

Bart Goldberg

Coffee filters to strain Water based Poly?

Bart Goldberg

I have a gallon can of some General Finishes water based poly and the edges of the can are rusting and dropping into the finish. Can I use a paper coffee filter to strain the finish before use?

Thanks

Bart

Re: Coffee filters to strain Water based Poly?

#2

Jason Roehl in Lafayette, IN

No.

Jason Roehl in Lafayette, IN

Go to a paint store and get a mesh filter, if you don't have any pantyhose laying around you could use. A coffee filter is much too fine to allow finish through.

Jason

Re: Coffee filters to strain Water based Poly?

#3

Re: No.

Lee Schierer in McKean, PA

You could also use multiple layers of cheese cloth in a funnel to strain it.

Lee

Re: Coffee filters to strain Water based Poly?

#4

Go to Lowes

Mark Mandell - Gone Round In New Jersey

Get a couple of strainer funnels (cheap and reusable at lease 10 times if you rinse them). While you're there, get a new can in the paint dept. to hold your finish after you strain it.

Ditch the rusty can.

Re: Coffee filters to strain Water based Poly?

#5

Re: Coffee filters to strain Water based Poly?

fred in ct

Here you go.

http://www.harborfreight.com/pack-of-100-60-to-70-mesh-paint-strainers-91376.html

Re: Coffee filters to strain Water based Poly?

#6

Re: Coffee filters to strain Water based Poly?

Alex Grigoriev

I use stainless steel mesh strainers, bought at www.eastwood.com.

Re: Coffee filters to strain Water based Poly?

#7

Re: Coffee filters to strain Water based Poly?

Jerry Gibbs

I just bought medium mesh filters for 25 cents per at Home Depot.