Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Any refrigeration guys here?

Posts

Any refrigeration guys here?

#1

Lee Grindinger

Any refrigeration guys here?

Lee Grindinger

One of the projects on my list is a custom sized refrigerator. I want to build a small and specifically sized fridge. I would like to purchase a 'dorm' style machine, throw the cabinet away and make my own.

So, Dr. Freeze, can I cut the refrigeration lines, reattach them once through the new walls, and get the thing recharged?

This fridge will house a can of beer.

Thanks and chillingly yours,

Lee

Re: Any refrigeration guys here?

#2

Re: Any refrigeration guys here?

Tony - Memphis

Sounds complicated. A lot of those systems are ot meant to be maintenanced, so it might be hard to get it refilled. And, you'd have to be concerned with matching the air flow, cpacity, blah blah blah for it to work well. If you truly only want a one can fridge, I would check out the peltier coolers they sell that plug in your car or meant for a desktop. Much simpler system and might be easier to modify.

Tony

Re: Any refrigeration guys here?

#3

Lee Grindinger

Yah, well..., a big can

Lee Grindinger

16 gallons. I've shopped and seen, none meet my needs.

Re: Any refrigeration guys here?

#4

Re: Any refrigeration guys here? *LINK*

mdclor

Lee, this one might be about the right size for your needs. You should be able to cover the exterior with veneer to make it presentable. HTH


2.7 Cu Ft Fridge

Re: Any refrigeration guys here?

#5

I think you are over thinking this.

Keith Newton

It sounds like you are trying to make this too refined for a "man-cave", this is not allowed!!!!!!!!!!! Like everybody else, a keg-orator should start with a free rusted out fridge.

You may be called before the board. ha

Re: Any refrigeration guys here?

#6

Re: Any refrigeration guys here?

walta

You need to be aware deliberate releasing the refrigerant is a federal crime. No I am not kidding.

I have not looked at the model in the link but often the cabinet walls are part of the refrigeration system the outside is flat and the inside panel stamped with a serpentine track and welded to the outside and the refrigerant flows in the gap.

Walta


img

Re: Any refrigeration guys here?

#7

Re: Any refrigeration guys here?

George

Take a look at marine supply places. They have separate evaporator and compressors designed to be built into a boat. Often powered by 12V but a power supply can fix that. In the northwest is Fisheries supply but any commercial marine supply can connect you.

George

Re: Any refrigeration guys here?

#9

Re: Any refrigeration guys here?

Bill Turpin in WNC mountains

Some of these specialty refrigeration units have exotic refrigerants that are not commonly available to HVAC mechanics. Get a written quote before you proceed. The price for trapping the Freon, repairing the cut lines, vacuuming the system to 50 microns, and recharging will probably OVERPOWER your thirst!

Re: Any refrigeration guys here?

#10

Re: Any refrigeration guys here?

Gary Bindel

Twenty-five years ago I did HCAV work. It is not a good idea to open up a sealed system. I would try to come up with a design that would not require you to open the system up. If you do, be sure to add a dryer/filter to it. The metering device on these units is a length of capillary tubing which is a very small internal diameter and easily blocked if any debris enters the system. Moisture in the system will cause the oil to become acidic and cause the windings to short.

Re: Any refrigeration guys here?

#11

Lee Grindinger

Thanks guys!

Lee Grindinger

I'll find a local refrigeration guy and get his take.