I wrote up a project I'd built as a saw accessory and within five minutes got the nicest compliment I've ever received from one of the members whose contributions I value the most. Then it went downhill.
If you want to read about it, I've posted it at my site. Don't come back and tell me what a piece of crap or horrible idea it is.
What a wonderful idea, Rod! I was planning to build a collection of smaller boxes that I could hang over the right side of my fence, hooked over the top of the right fence, but there was one concern that held me back: After I had built them, and filled them, there was nothing stopping me from filling up the top of the fence again. If I built more, I would just have trouble finding a place to store the boxes.
Then I saw yours, and for about five seconds, I thought it had saved me. But then I realized I now have no place to put it on top of the fence, even though I still have a need to keep accessories near the table saw fence. Alas, I have recently bought one of these:
I guess I'm back to the original outrigger tool box idea.
I still have one question, which is applicable to anyone who wants to build one of these: Where do you put it when you need to remove it from the fence? I already have a tube hanging under my extension table where I slide my rip fence when I'm using a crosscut fence, or a dutchman, or need the whole saw top for an assembly table. Neither your tool box nor my outrigger tool boxes nor the stock guide fit in it.