Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Fund Raising Ideas

Posts

Fund Raising Ideas

#1

Bart Goldberg

Fund Raising Ideas

Bart Goldberg

I am looking for suggestions on things to make that are fairly simple and easy. I have already started on various styles of cutting boards - amazing what I've been able to do with the many scraps of wood in my shop. So, looking for other ideas that you may have.

Thanks in Advance!

Bart

Re: Fund Raising Ideas

#2

It might be easier if you provide more info

Gary Smyth

Who gets the money? How many do you need? Adult or kid targeted? Is there a theme or purpose for the funds? How much of your time are you going to invest? Is your reputation on the line for whatever is produced? Another good looking paperweight/pen holder/magnetized whatever may fit the bill -- or not.

Re: Fund Raising Ideas

#3

Bart Goldberg

Re: It might be easier if you provide more info

Bart Goldberg

Gary,

The money is to go to our local 4H club (robotics club). They are holding a Crafts Fair fundraiser this Friday evening ( i know - very short notice). Since i'm "between jobs" at the moment, I can dedicate all my time between now and then to make stuff for sale. It can be for either kids or adults - as long as they are interesting and can sell.

Thanks

Bart

Re: Fund Raising Ideas

#4

You might check

Gary Smyth

"Wood Toys for Four H" and "Wood toys for robotics" on any browser and see if those examples provide a springboard. There is also the perennial multi color wood clipboard that seems to be popular no matter where. Stacking puzzles?

Time and finishing is the enemy. Good luck in the search.

Re: Fund Raising Ideas

#5

Re: You might check

Jesse Cloud

With the small amount of time left, you probably don't have the option to make anything new. Here are a few ideas anyhow. I have made business card holders, just small little boxes with a low front so much of the card is visible, that were popular gifts and I suspect would sell well.

Also at local craft shows I see boards made like cutting boards, but with clipboard hardware at one end, selling like hotcakes. Anything with a clock in it sells well. Also frames for photos, wine bottle holders, hand held mirrors, trivets, and other small useful things seem to move well.

Re: Fund Raising Ideas

#6

Bart Goldberg

Where to get Clip for Clipboards?


Re: Fund Raising Ideas

#7

Re: Fund Raising Ideas

Barry Irby

One thing I made that was very well received was a Pizza peal (peel?). Basically a paddle that was tapered to the lead edge. Mine were about 12" wide to fit through my planer. I use wedges like cedar shingle to create the taper. (one thickness of shingles for one side and double for the other side. Stuck them on with double sick tape to keep it all together for the trip through the planer. You need to pad the underside with a piece of wood to raise it enough to get the handle off the platen of the planer. If you have a drum sander like a Performax it will do a great job of sanding while the wedges are still in place. I glued mine up out of a longer narrow scrape and two shorter "wings" and sawed the shape on the band saw and rounded all the edges with a round over bit. It does not need any finish or you can oil it if you like. I use mine often.

I have also turned a number of plates or very shallow bowls that are excellent of dinner salads.

Ornaments would be another good item.

Re: Fund Raising Ideas

#8

Re: Fund Raising Ideas *LINK*

Lars Parrington

I'd recommend these 3D reindeer, especially if you can figure out how to get a smooth enough cut that you don't have to sand.


http://woodgears.ca/reindeer/

Re: Fund Raising Ideas

#9

Re: Where to get Clip for Clipboards?

David Yoho

Rockler sells two types and Lee Valley has one that includes a calculator.