Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Long time gone, looking for input on a table saw

Posts

Long time gone, looking for input on a table saw

#1

Lee Grindinger

Long time gone, looking for input on a table saw

Lee Grindinger

Hello folks, been a good long time since I was here. Life has been good. I am looking for a cabinet saw. since my days of 'pro' woodworking are long gone I'm looking to get an inexpensive cabinet saw and wondering about the Grizzly/Steel City/Etc comparisons. I want to keep it under $1500 and need the 52" Beismeyer (or equivalent) and 3 horses under the hood.

Thanks!

Re: Long time gone, looking for input on a table saw

#2

Alan Young

I knew that SolarCoveredAcre Couldn't stay empty!

Alan Young

What are going to be making?????

Re: Long time gone, looking for input on a table saw

#3

Re: Long time gone, looking for input on a table s

Dick Coers

Sorry, can't help you with that comparison. My next one will be SawStop though. A couple grand above your price range would be a cheap payoff if I make a mistake with my hands.

Re: Long time gone, looking for input on a table saw

#4

Lee Grindinger

Sawdust and noise

Lee Grindinger

My Baboo wants some stuff and I need to find a way to stay off the streets. funny thing, Alan, I've been working projects here on the hovel since we got back and all of a sudden I felt the desire to make some sawdust again. I doubt I'll ever get back into that silliness I used to do but dabbling sounds more appealing as time goes on.

Re: Long time gone, looking for input on a table saw

#5

Alan Young

Well that's good news- And hey-

Alan Young

if you have any other questions on woodworking or furnituremaking-feel free to ask. we are a friendly lot and I'm sure we can point you in the right direction-- :)

Re: Long time gone, looking for input on a table saw

#6

Re: Ewww, SawStop, yuck !

ChuckInND

Dick, I guess that means that you won't be using a band saw, a router or router table, a jointer, a drill or a drill press, sharp chisels, or anything else that can take a pretty good bite out of you. Sorry, I don't buy into the typical SawStop sales pitch. And I'm not impressed with the owner trying to force a made in Taiwan saw down my throat. You'll never see a SawStop in my shop.

Re: Long time gone, looking for input on a table saw

#7

Re: That silliness I used to do

ChuckInND

Lee, I totally understand. I'm at about that point too. But I'm keeping the American made Contractors that I bought new in 1995. It will be more then likely the last saw that I'll have. Money is tight, and there isn't any money in woodworking. I can make way more per hour mowing lawns and shoveling snow.

Re: Long time gone, looking for input on a table saw

#8

Re: Long time gone, looking for input on a table s

Dustmaker Mike

Howdy long time no see. Were did ya settle down at? If there is a local Craiglist there, that is were I would look for an older Delta. As for the other ones I am not so sure of. Have Fun Mike

Re: Long time gone, looking for input on a table saw

#9

Lee Grindinger

Yep, been looking

Lee Grindinger

Got a saw wanted ad there and checking often. I hope something pops up.

Re: Long time gone, looking for input on a table saw

#10

Lee Grindinger

Thanks 


Re: Long time gone, looking for input on a table saw

#11

Re: Long time gone, looking for input on a table s

TomD

Yeah Craigs. Up here in Canada we have Kijiji.ca. It is fabulous for tools. Craigs is good too, but it seems to be falling behind. If you look up Kijiji.com (last time I tried) you get ebay, which may tell you all you need to know.

Re: Long time gone, looking for input on a table saw

#12

Re: Ewww, SawStop, yuck !

TomD

I would probably have it in a commercial setting, I think we do owe workers a "safe" environment, and all that. But there is never any reason to cut yourself on a saw, so the feature seems only designed to make it possible to do stuff one shouldn't do in the first place.

Re: Long time gone, looking for input on a table saw

#13

Hey Lee, Good to see you back, *LINK*

Keith Newton

While you are shopping, you might as well get the granite top, so you can sit your cold beer bottles on it without leaving a rust ring. ha

No point in having to change lifestyles to drastically all of a sudden, might not be good for the heart.

I've never used one of these, so don't take this as a personal endorsement.


http://www.toolcrib.com/blog/2009/01/how-it-leaked-why-its-hot-the-new-ridgid-r4511-granite-top-hybrid-table-saw

Re: Long time gone, looking for input on a table saw

#14

Re: Ewww, SawStop, yuck !

Jim Hoeller

A band saw, drill press, or planer will not cause as much damage as a table saw. I speak from experience and a saw stop would have saved me about $1,500 over the cost of the saw.

Re: Long time gone, looking for input on a table saw

#15

Lee Grindinger

Hey Keith, thanks

Lee Grindinger

Nah, no granite saw top for me, just gimme that ole cast iron. Besides, I enjoy dropping people's coffee/soda/beer into the garbage when I find it there, and it only happens once.

Re: Long time gone, looking for input on a table saw

#16

Had one at my day job

Dick Coers

They are beautifuly made, wonderfully engineered. I nearly cut all the way through one finger 31 years ago with an Elu biscuit joiner, of all things. I don't have the last knuckle in that finger any longer. It took two surgeries to get it to the messed up state it is now. Once you've gone through the pain, you might consider any technology that would prevent that from happening again. I was a lot luckier than many. Another local guy took 4 fingers off one hand. They reattached a couple of them, but one had to come back off. It ened his woodworking career forever. I bet he wouldn't think that technology was being forced down anyone's throat if he could have his livelihood back.

Re: Long time gone, looking for input on a table saw

#17

Alan Young

Another thought

Alan Young

Have you checked around with your fellow Big Sky Guy=Joe Johns? Joe is frequently on the lookout for such things---

-Alan

Re: Long time gone, looking for input on a table saw

#18

Re: Long time, input on a cabinet saw? here's some

Bob Entwisle in NJ

Hi Lee,

So, back in MT for a while it would seem?

Sheesh, your 1500 budget got me a Unisaw with a Bies back in '01!

Anywho, I've seldom heard bad things about the Griz 1023.

I've got Griz 14" BS and it was 1/2 the cost of a Delta, and for my hobby use it's fine. It does what I need it to do. Is it perfect? no, are there things about it I'd like to be different? Yes. But I bought it knowing all those things, and it fit my budget at the time.

As you have seen from the other responses here, the only new thing under the sun in cabinet saws is the SawStop.

For cutting wood to make some stuff for Ruth, a new Griz 1203 will do all that you are asking for.

Obviously a used Unisaw for the same or less would be a better option etc.

Say Hi to Ruth, (and a belated Happy Birthday to her too).

Bob in NJ

Re: Long time gone, looking for input on a table saw

#19

Lee Grindinger

Ferrous, the great god of iron has smiled upon me.

Lee Grindinger

Thanks folks! I have found a 1964 Unisaw with a surprisingly few number of quirks. The great god of iron has given me a big toothy grin.

Re: Long time gone, looking for input on a table saw

#20

Re: Ferrous, the great god of iron has smiled upon

TomD

Well done. I have to say that god is a generous god. I think the reason is the number of people looking for this stuff has gone way down. Just a guess. But the prices are crazy if you have space, can made runs during business hours, and own a truck or otherwise can get it home.

Re: Long time gone, looking for input on a table saw

#21

Re: Hey Lee, Good to see you back,

TomD

I really like the idea of a granite top. A lot of us work in imperfect climates where avoiding rust is a major problem. I think this was a great all around idea. Though... the idea of it as a beer cooler may be an insight into why the Saw Stop is such a major advantage in some shops. As you know they also sell coolers built into tool chests and such.

Re: Long time gone, looking for input on a table saw

#22

Re: Bandsaw

TomD

I believe that in a survey FWW once published the band saw was the most dangerous tool in the shop (based on what showed up at ERs). It is after all the only one that you can slice your body fully in half on. It was suggested that part of the reason the BS was so dangerous was because people thought it was safe. I tend to think it was the tool, but maybe it was also the perception issue. You can feed yourself into a jointer like that famous scene in Fargo, you could certainly loose all your fingers there. Drill presses are very dangerous, they will kill you. I use a 25 dollar one I picked up, for light work, because it is just at the limit of what I can shut down if bad things start happening. If you ever get tied up in the heavy ones, you can't stop them and they will wind you up like getting caught up in the revolving door at the gates of hell. Drill presses are metal working machinery, and that stuff is evil, if you cross it. Google some pictures of metal working machines if you dare, you will find picture of heads attached to stuff that looks like someone made toffee.

I think table saws can be used with complete safety, if proper procedures are observed. The problem in commercial situations is that one can be sure that proper procedures are rarely observed, and that there are pressures to ensure that they are not observed. If one cut one's fingers off pre-Sawstop, it wasn't because safety devices and techniques to prevent it didn't exist, it was simply that they weren't implemented or observed.