Inca 570 Planer Question
Tom
Anyone here with knowledge about the Inca 570? I have a question about the out feed roller.
Thanks!
Knowledge You Can Build On — Est. 1998
Inca 570 Planer Question
Tom
Anyone here with knowledge about the Inca 570? I have a question about the out feed roller.
Thanks!
Re: Inca 570 Planer Question
ebd
Try some of the links here: https://www.google.com/#q=inca+570+manual
What's the question?
Re: What's the question?
Tom
I would like to talk to someone who has disassembled a unit. Need some info about the point where the outfeed roller bushing meet.
I've disassembled one, to a point *LINK*
Ellis Walentine
I have a 570 that I only use for jointing, but at one point I took the whole drive system apart because the nylon gearshift mechanism had worn out. I got a new one but never bothered to install it, because I have other planers that are wider, and switching over to planer mode on the 570 is a bit of a pain.
I'd recommend calling Eagle Tools in LA if you have any Inca technical questions.
You might also check this discussion we had a couple years ago...
Ellis
Inca 570 question
Re: I've disassembled one, to a point
Tom
Thanks! I will give them a call.