Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

What is recommended for chair leg ends?

Posts

What is recommended for chair leg ends?

#1

What is recommended for chair leg ends?

Bill Tindall, E.Tn.

Ladder back dining chairs and a hardwood floor. Right now I have nothing on the ends of the legs and it is not a problem for us. But when guests visit they seem incapable of lifting their butts when sliding the chairs up to the table. The result is scraping the legs across the floor with a 200 pound load. Is there a chair end thingy that would provide less friction?

Re: What is recommended for chair leg ends?

#2

Jim DeLaney, Austintown, Ohio

Re: What is recommended for chair leg ends?

Jim DeLaney, Austintown, Ohio

Bill,

I have those nylon 'button' glides on the legs of our dining room chairs. So far, no damage to the white oak floor. I guess time - and continued use/abuse - will tell, though.

Re: What is recommended for chair leg ends?

#3

Re: What is recommended for chair leg ends?

Barry Irby

I have use the nylon buttons and the felt pads. Both work nicely util they get an embedded grit. Sort a one grit sheet of sand paper. The felt may be a little more prone, but both will do it. Actually the end of the leg will do it also. So, I don't ahe a good answer.

Re: What is recommended for chair leg ends?

#4

Ellis Walentine

Love/hate relationship

Ellis Walentine

I hate the look of nylon glide pads, but they work and they're cheap. Felt works too but it doesn't last.

Ellis

Re: What is recommended for chair leg ends?

#5

Jack Guzman from Maine

Re: What is recommended for chair leg ends?

Jack Guzman from Maine

I like the white plastic things for durability but felt is best for me. Keep it clean and you shouldn't get imbedded grit. Just glue it on,some are preglued.On the altar in my church every piece of furniture has felt under it.You only see the gap between the furniture and the floor.---Jack

Re: What is recommended for chair leg ends?

#6

Re: What is recommended for chair leg ends?

mdclor

Bill, one other consideration: if you are happy with the height of the chairs, the glides will raise them somewhat, felt less than nylon less than chrome. That slight difference might make the chairs uncomfortable for shorter people. DAMHIKT

Re: What is recommended for chair leg ends?

#7

Re: What is recommended for chair leg ends?

joe in a Cleveland suburb

We always use the thick felt ones. They've always worked well for us.

Re: What is recommended for chair leg ends?

#8

Re: What is recommended for chair leg ends?

Jesse Cloud

I was taught to glue a square of cork to the bottom of the legs, when dry trim with a chamfer using a sharp chisel. Like felt, it will wear out, but it is easily replaceable.

Re: What is recommended for chair leg ends?

#9

Adam of Oakland

Re: What is recommended for chair leg ends?

Adam of Oakland

I like the idea of cork, haven't tried it. Felt works best in our house with oak flooring. I do have to replace some of them on our chairs. We have one chair with metal glides, and they do anything but "glide"!!!

anyway, i'd regard that sort of wear as: the patina of friendship. Best to have your floors worn out by company than not, right?

Something in my grain likes floors that are scuffed up a bit.

-Adam of Oakland

Re: What is recommended for chair leg ends?

#10

thanks

Bill Tindall, E.Tn.

Will try the felt first, though I have not aversion to the nylon.

Re: What is recommended for chair leg ends?

#11

Re: thanks

joe in a Cleveland suburb

Just turn the chairs over now and then and clean the felt off. That's what I do.