Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

dark stain

Posts

dark stain

#1

dark stain

Jack Putnam

I am working on a project that requires a dark stain. I am using Red Mahogany by minwax. I am using the stain on birch plywood. First I sand the wood all over then I coat the plywood with a wood conditioner by minwax let it set for a few minutes then wipe it off Then I put the stain on and let it set for about 20 seconds then wipe it off I don"t want it to get too dark.

I notice that when I wipe off the stain it is splotchy especially where it shows the layers of the wood. I used another stain which is puritan pine and it is a light stain and it turned out really nice. Why am I getting such a mess from this stain? Thanks for any help you can give.

Re: dark stain

#2

Re: dark stain

Dick Coers

You asked about splotching on plywood back on Oct. 24th Jack. Didn't you like the tips back then?

Re: dark stain

#3

Re: dark stain

del schisler

ply wood is very hard to stain , with out blotching whatch this video

https://www.youtube.com/watch?v=IfCYMdrP8rM&list=UUUgl-M-8eVLCs5OwGx9CLsg

Re: dark stain

#4

Re: dark stain

Howard Acheson

With woods that are highly susceptible to uneven coloring like birch, the darker the stain the more apparent the uneven coloring. It's the uneven absorption of the stain that causes the problem.

One of the easier ways to deal with it is to apply a 1/2# spit coat of dewaxed shellac. After it dries use a gel stain. Gel stains will stay on the surface. After the gel stain dries, spry on a clear coat and then your clear coat.

Re: dark stain

#5

I agree with Howard

Ron in Sterling CT

I used MinWax stains for years and struggled with the very problem you describe. Two years ago I switched to Gel stains. I have not had a blotch problem since. Sometimes I use a spit coat of shellac, and sometimes I use the Minwax Conditioner. There are plenty of good brands of Gel stains out there.

Ron