Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Carnival wheel

Posts

Carnival wheel

#1

Carnival wheel

Gary Smyth

Over a pre-Thanksgiving family discussion I had a different conversation with a Niece who is starting out. The discussion was that she wanted an old fashioned carnival/gaming wheel for her new digs. She said that she hit ebay and the prices for what she wanted were in the $400 to $750 range. This is a 36” wood round wheel painted with numbers (or dice) and x number of steel pins around the perimeter, a post to hold the clicker, and a piece of leather. I thought “whoa” that seems a lot for a painted wheel. I’m considering I might make her one, but after looking at fifty or sixty wheels on the net I’m thinking that what appears deceptively simple is perhaps a bit more than I want to take on. The wheel itself is simple enough, but the painting and aging, center hub, balancing, pin placement is tedious work to do. Has anyone ever attempted a carnival wheel? She does not want a spoke (bicycle) style, or steampunk, and, frankly, I don’t want to give her or spend time on something she thinks looks “homemade”.. She’s a good kid but I don’t want to make her feel awkward. Bad idea?

Oh, I hit a couple of churches and fire departments and they are guarding their wheels as if they are gold. Open to other thoughts. ]

Re: Carnival wheel

#2

Re: Carnival wheel

greg

I encountered the exact same situation for the local neighborhood association. Your EBay experience parallels mine. I eventually bought one on Craigslist from a company that held school carnivals.

They had made it themselves , so it didn't have the polished look you are seeking, but it works well for community events. Good luck in your search.

Re: Carnival wheel

#3

That has cnc written all over it

Dick Coers

Know anyone with one? All the pin drilling would be dead on, and all the numbers and grids could be engraved on. But these started when man decided to gamble, it will just take time. A router on a trammel will cut the outside diameter, inscribe a circle to located and start the pin drilling, and maybe some geometric pattern. You can buy stencils to paint the numbers, and a wash with tea will "age" any stain or paint job.

Re: Carnival wheel

#4

Neat Project

Tony-Memphis

I agree. With a couple of simple jigs (trammel, templates) and some careful layout, you could easily make something similar. You can print the letters and then trace them onto the surface using "carbon" paper. I've done that several times. I then just try and stay in the lines with paint. Aging can be done easily with a glaze. Looks like a fun project to me. You might also look around for a sign painter or race car letter person. Another thing I've done is have a vinyl company use my design to cut out in vinyl and used that as a stencil. The hobby stores also have rub on letters. Good luck.

Tony

Re: Carnival wheel

#5

Re: Carnival wheel

William Duffield

They all look homemade, even the one on "Wheel of Fortune." And yet, any one you show in the pics would get P. T. Barnum's seal of approval. Well, maybe a roulette table from the Monte Carlo Casino wouldn't look home made, but my guess is that's not what she's looking for.

Balancing a wheel is not difficult, especially after you've installed the bearings. e.g., bandsaw wheels, grindstones, and even tires. Jigs for cutting mild steel round stock are established technology, as is laying out a circumference for manufacturing large gears. Thousands of these were laid out and built pre-CNC, with nothing more than a straight-edge and compass.

I think your biggest artistic issue is making it look old, well used and slightly disheveled, but woodworkers do that all the time with reproduction furniture and forged antiques.

Would you build one for a paying client for $400? Could you find a professional cabinetmaker who would build you one for $400?

Perhaps the bottom line is that I don't understand your definition or disparagement of the word "homemade." After all, every desk built by Abraham and David Roentgen and every chair built by Sam Maloof were home made. OTOH, the junk you can buy at WalMart and IKEA are not homemade.

Since she's just starting out, does she really know what she's looking for? Maybe she's imagining she's Vanna White? Will she change her mind next week? Will she paint over your careful lettering and decoration when she decides she's tired of the color scheme?

How about a Carnival Wheel app for her iPad? Some of them are probably even equipped with flashing neon lights and carousel calliope music (electronic, of course). http://upload.wikimedia.org/wikipedia/commons/5/5a/La_Donna_E_Mobile_Rigoletto.ogg

It looks like it could be a fun project, with lots of opportunity for a successful outcome, but also a plethora of potential pitfalls.

Re: Carnival wheel

#6

$400 is 6 hours of shop time

robbcarr

I don't think you can build one for what you can buy them for... when you get done with transfer letters, paint and wood that $400-$700 looks pretty good.

Re: Carnival wheel

#7

Not out of the question but

Gary Smyth

I received this reply from the only CNC wood advertiser with a capacity large enough in one piece around here. "Gary, I asked my supervisor and this is not something we would be able to do. I apologize. Thanks, Carri"

I thought that a cut out would be easy, but apparently not to their liking. That was a sign shop. Doing the basic cutouts there would have made things so much easier. I'll check cabinet shops tonight to try and find joy. Disappointing.

Right now I don't have the space to do a full 30-40 inch cut out and doing it in sections and gluing up is something I'll have to think about. Templates I can do, spacing also, letters and numbers I can do as has been suggested. As to lining --there is a auto body pin striper I know. Finishing might be the easiest with a shellac undercoat, paint, fine charcoal ash, a bit of dilute dye, judicious sanding and rubbing and glaze. Hardware and pins I can bake and age in ammonia, then salt water and air.

I'm thinking hard about this, if not now, perhaps Spring.

Re: Carnival wheel

#8

Re: Not out of the question but

Earl

Gary don't forget to show it here when you get done (notice the confidence I have in you). I for one would like to see it. Earl

Re: Carnival wheel

#9

Re: $400 is 6 hours of shop time

Yonak

Wow, robb .. over $65 per hour shop time. I can only dream of that !

Re: Carnival wheel

#10

Re: $400 is 6 hours of shop time

robbcarr

According to CabinetMaker Magazine that's about an average shop rate.

Re: Carnival wheel

#11

Re: Carnival wheel

TomD

The second yellow wheel the simple one. I would consider that one, it looks easy. You rout the circle perimeter, and you could use a pie jig to make identical spoke cut-out. I can manufacture any metal thing, but it might be necessary to find some kind of lazy suzan bearing that you could adapt to this application. Not all that clear what you could use for that, there are a ton of online plans, and mostly they ignore it, one mentioned a lazy susan. The pin holes could be easy to do, but tedious as you say.

Graphics would be the stretch for me. Spraying them would be the best idea, you can find an online source for those numbers, even cut them out from something copied from the photos you have lifted, then mask and spray. Maybe your client has some artistic talent, though she would also need to be a finisher since the unfinished hand off can be a problem in a relationship.

The more complex ones I wouldn't touch.

Up here the CAD set-up charge is enough to discourage me.