Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Hammond Glider Trim-O-Saw

Posts

Hammond Glider Trim-O-Saw

#1

Hammond Glider Trim-O-Saw

paul woolson

My dad was a printer all of his life and used a Hammond Glider Trim-O-Saw for trimming lead spacers in his letterpress. When he sold his business, he threw out the saw, literally, threw it in the landfill. I could have killed him. He said it was ruined because a mouse had chewed through the power chord. I explained to him that it's not so hard to replace a $10 power chord.

Anyway, I've wanted one of these for years. It's next to impossible to find a small machine that is accurate. My shop doesn't have room for a big ol' powermatic. Right now I'm using a Delta contractor's saw and really want to up the accuracy game.

So, my question to the forum: Does anyone know of anyone wanting to sell one of these? Numerous interweb searches have resulted in online auctions that have expired years ago. But I don't know how to get on a list when new auctions occur. Any tips? Anyone dabble in this vintage machinery?

Thanks, Paul

Re: Hammond Glider Trim-O-Saw

#2

Re: Hammond Glider Trim-O-Saw

ChuckInND

Watching ebay is probably your best bet. As far as your Delta Contractor's table saw, I've been using one since 1994 when I bought it new, and I find it to be very accurate. I'm so happy with it, that I also have a vintage 9" Rockwell Contractor's table saw in the small basement shop. I get tired of people insinuating that Contractor's table saws are not accurate, it's simply not true. The same goes for power and dust collection, once again, not true. I think that the stories start with people that have a lesser brand with a not so great fence, don't know how to hook up a piece of machinery to the proper electrical source, and ofcourse there are plenty of cabinet saw pushers out there.

Re: Hammond Glider Trim-O-Saw

#3

Re: Hammond Glider Trim-O-Saw

paul woolson

You're right and I probably should have emphasized that MY contractor's saw isn't as accurate as I'd like it to be. But much of that is my fault for not taking the time to get it dialed in perfectly. The motor on it is starting to fail and I'm using that as an excuse to NEED a new saw. As I stated before, it's hard to find something small yet accurate and powerful (in all tools, not just table saws). Seems like the only way to get something really well made is to buy the BIG version.

Thanks for your response!

Re: Hammond Glider Trim-O-Saw

#4

Ellis Walentine

Re: Hammond Glider Trim-O-Saw

Ellis Walentine

I've owned five Gliders over the years and currently have a classic one (#725 IIRC). I use it all the time, with a new blade made for me by John Ferrie of Ridge Carbide. The original lead-cutting blades were ground straight across, and I wanted them with ATB configuration for cross-grain cutting.

I don't know where to tell you to find a Hammond, but if you can, get one with the swing-up tenon fence (my term) on the right infeed table. I had to make one for my current saw, but it is a godsend when sawing tenon shoulders.

Good choice. Actually, I think I have a name on file somewhere of a guy who specializes in Glider parts. If I can dig it up, I'll forward it to you. He'd probably have his ear to the ground much better than I would.

Side note: Hammond really discouraged using the Trim-O-Saw for woodworking because of liability concerns, but they are really superb for crosscutting and mitering and end trimming. With the arborless blade arrangement, they can trim a piece up to 4 3/4" thick perfectly, and with the hold-in clamp, they can cut pieces down to 1/8" x 1/8" x 1/8"(optimistically).

Ellis

Re: Hammond Glider Trim-O-Saw

#5

Re: Hammond Glider Trim-O-Saw

ChuckInND

I looked at the saw in Google images, and it is rather different. I'm guessing that it's strickly a crosscutter, and not a ripper. I see that one went for over $600 in ebay last year. If your looking for a smaller table saw then what you have now, the old American made 9" Rockwell Contractor's table saw that I mentioned earlier are about the size of todays plastic and aluminum jobsite saws.

Re: Hammond Glider Trim-O-Saw

#6

where to find a Hammond

Craig

One good place is www.machinejunkie.com, they have a forum devoted to the Hammond and lots of information about alterations and modifications. Occasionally they also have saws posted for sale by members.

On the blade side Forrest makes a Woodworker 1 blade specific to the Hammonds, I don't recall the part number but you can call them and they'll know what you need.

The guy in the shop next to me used a Hammond as his only crosscut saw for years and was very happy with it. I bought one in pieces thinking I would restore it before realizing I really have no interest in doing that. I also have a CG Morrison printers saw which is about 2/3 the size of the Hammond and has a great sliding miter bar and workpiece clamp that can hold pieces down to 1/8" pretty easily. Also has a 45 degree miter clamp that works well for small parts.

They are great saws but I would suggest searching for one in working condition, they do show up now and then for a couple hundred bucks. The most you might need to do is switch out the motor as many of them where 3 phase.

Craig

Re: Hammond Glider Trim-O-Saw

#7

This thread has left me baffled

Bill Tindall, E.Tn.

I have never seen one of these saws so I have to imagine what it can do from the exchanges, which seems to be accurately cross cut, and that's it/ From a purely practical perspective I am failing to see why it is worth taking up floor space with a saw that just crosscuts, and requires a custom blade to do so. Presumably one still needs another table saw to rip?

Accuracy? A sled on any table saw will cross cut and miter as accurate as one makes the sled. Since I have never seen the alternative I don't know how handy it is to add stops for repetitive cross cuts and other jigging operations, something that I do regularly on the sled. I presume using a dado blade is not an option either.

Re: Hammond Glider Trim-O-Saw

#8

I may have blades for this saw

Bill Tindall, E.Tn.

I bought some stuff from a newspaper shop auction. In one of the boxes were some 8" blades with large arbor holes that I presumed went on the saw used for sawing up the ingots I accidentally bought.

Near the end the auction was in get-it-over mode and stuff was going quickly. I bought a cabinet to be used by me for solvent storage. Inside were many ingots of what I presumed to be type metal. The company gasped when I went to move it, as they did not intend to sell that metal and the cabinet for $5. We made an exchange deal on some miscellaneous boxes of stuff and in one of them were the saw blades.

I bought several tables used to assemble type. There are about 3.5' high with milled cast iron tops. Heavy!! They make dandy assembly tables and tables for tools like my grinder.

Re: Hammond Glider Trim-O-Saw

#9

Re: This thread has left me baffled

ChuckInND

My go to machine for crosscuts is the compound miter saw, unless the boards are too wide for it. I'm not much of a sled person. But thats just me, everyone has their own way of doing things, and have different sized shops, different incomes, etc. As far as old American made machinery goes, I think that it's the way to go nowdays if you know what to look for. Most of it is well made and very affordable. For instance, there isn't anything new out there that I'd trade my table saw for. Everything new out there is cheaply made, gimmicky imports that cost more then the good old stuff. Hybrid ? There doesn't seem to be a set standard on what can be called a Hybrid table saw, and I don't need an Industrial and stationary table saw for my hobby shop.

Re: Hammond Glider Trim-O-Saw

#10

Ellis Walentine

Glider blades

Ellis Walentine

Hammond saws have an arbor that you screw the blade to. There are three countersunk holes around a 7/8" (?) arbor hole that are actually how the blade attaches. The blade diameter would be around 7 1/4" and the grind would most likely be a rip tooth, which is what they used for lead.

Ellis

Re: Hammond Glider Trim-O-Saw

#11

Re: Glider blades

ChuckInND

A low tooth count doesn't sound good for a crosscut, and I'm guessing that the blades don't have carbide teeth either.

Re: Hammond Glider Trim-O-Saw

#12

Ellis Walentine

Re: Glider blades

Ellis Walentine

I'm running a 7 1/4" , 40-tooth ATB carbide blade and the cuts are glass smooth.

All my Trim-O-Saws had carbide blades, but the original lead-cutting blades had flat-top teeth, like a rip saw, but without the rake angle of a traditional wood-cutting rip blade.

Ellis

Re: Hammond Glider Trim-O-Saw

#13

Re: Glider blades

ChuckInND

For an old saw like that I'm surprised that they had carbide toothed blades back then. 40 teeth on a 7 1/4" blade is quite a few teeth. Like you say, with the correct grind it should work well for crosscutting.