Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Coming back & a wee gloat

Posts

Coming back & a wee gloat

#1

ebd

Coming back & a wee gloat

ebd

I've been gone from the wood forums for some time and have today decided to get back into the flow. I've been sidetracked by SCUBA lately.

I am sorry but I just have to gloat a tiny bit.

I've wanted a planer for a long, long time, BUT I couldn't justify buying a new one considering the amount of time I would be using it and the size of the things I would be running through it. Enter Craig's List. For more than a year there were planers listed that I tried to jump on - Dewalt 734 for $100, for example. People must sit at the computer continuously looking because all of them were sold long before I could react.

Long to short - I finally scored a Ryobi 1300. Anything that could be out of adjustment was. The bed was completely covered with hardened sap. After I started working on it I found that there were 3 frozen cutterhead bolts. One I got out with heat. The other two required drilling, an extractor and heat- heads were stripped round.

I replaced all the bolts with deep hex and did all the adjustments. Cleaned the bed with kerosene. I found the blades had only been used on one side and even that one was still pretty good. They just needed cleaned and maybe honed. The other side was brand new. I cleaned but didn't hone as I used the new side. I'll hold back the used blades for rough projects. Right now it runs smooth as butter and leaves a fine surface. I even got a brand new set of 2 sided blades for under $20 (Amazon). Now the gloat.

I got the planer for $50. It's even got a column lock among other nice features that were removed from the next generation 1301. I finally got a break. Now I'm finding it hard to resist looking for projects that would require a planer. LOL

Re: Coming back & a wee gloat

#2

Ellis Walentine

Welcome back and congrats

Ellis Walentine

What a deal for you. This is also a good lesson that sometimes a little fixing up can be worth a lot of jingle. I'm sure you will find something to use that "new" planer for.

Ellis Walentine, Host

Re: Coming back & a wee gloat

#3

ebd

Re: Welcome back and congrats

ebd

Thanks Ellis. I already have a few projects that will require the planer (a thin walled box out of something exotic for my special kitchen knives will be first). But before that I have 7 picture frames to make for various family members and some turning to do. I also want to finally make the backscratcher out of exotic scraps that's been waiting for a couple of years. Still, every time I see it I get the urge to plane something just so I can turn it on. LOL I may very well move the knife box ahead of the turning and scratcher.

Re: Coming back & a wee gloat

#4

ebd

Re: Welcome back and congrats

ebd

Thanks Ellis. Before I get to the first project that I'll need the planer for I have 7 picture frames to make for various family members - pictures that my Dad painted and gave them. Before that I have to get my place buttoned up for winter. Fall is so much work racing an unknown deadline.

Re: Coming back & a wee gloat

#5

Ooooh... A back scratcher from Exotic wood

Barry Irby

Perfect symbiosis. Some exotic woods make you itch. Finally, something to scratch the itch with. :D

Re: Coming back & a wee gloat

#6

ebd

Re: Welcome back and congrats

ebd

Sorry for the doubble post above. The first didn't show up after I hit "post" so I tried again. That one didn't either so I gave up. Now I know to just be patient - lol.