Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Old 18V Dewalt drill/driver replace or what?

Posts

Old 18V Dewalt drill/driver replace or what?

#1

JL

Old 18V Dewalt drill/driver replace or what?

JL

Once again my Dewalt batteries have died after many years of use.

They are NiCads, I accept this. I do have another driver with non-XRP batteries, so I am not left in the lurch.

$89 for a new DW970K-2 (with 2 batteries) at Amazon or Home Depot versus $99 for a set of two batteries (XRP) and $50/each (or more) for a battery rebuild.

The old driver is over 10 years old. I've replaced the batteries at least twice.

Should I consider Lithium ion (new kit)? Should I just bite the bullet and replace? Would Lithium ion batteries work w/ my old drill/driver? I am not wedded to keeping the old driver as it is over 10 years old.

Thoughts?

Re: Old 18V Dewalt drill/driver replace or what?

#2

Re: Old 18V Dewalt drill/driver replace or what?

John McGaw

Reviewers on Amazon report that the DeWalt 18V lithium packs work well with the older tools. Then there is the matter of a charger. The new DeWalt chargers for the XRP-style packs will charge either type, the old OEM chargers will only handle NiCd so the cost of a new charger might be a factor.

I bought myself a lithium drill/driver set which came with light-duty batteries and a proper universal charger and then I bought DeWalt's little circular saw and a heavy-duty battery and they all work well together but my old DeWalt drill is a 14.4V and I can't physically plug the higher voltage lithium batteries into it to check for function so I'm relying on what the reviewers reported.

Re: Old 18V Dewalt drill/driver replace or what?

#3

Alternative

Mark Mandell - Gone Round In New Jersey

Go to HD and find the Rigid section. You may find the "deal" on an 18v Li drill with 18v impact driver with the box marked as "lifetime" battery guarantee. Check carefully. If you find one, BUY IT. You'll never by another drill/driver battery as long as (a) you live and (b) Emerson Electric is in business.

This battery game the manufactures play is over for me.

PS: You must be careful to register the tool and follow their directions including send in the piece of the box that has the UPC on it