Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cipher Wheels are ready

Posts

Cipher Wheels are ready

#1

Cipher Wheels are ready

Stephen Kirk


These are adaptations of cipher wheels that were used from the 1400s up until the early 19th century. This is like an Alberti cipher, but I included the whole alphabet to make it easier for a modern user. With these you can make mono alphabetic, polyalphabetic, shift and keyword ciphers - plus others with some imagination. The polyalphabetic ciphers are rather resistant to frequency analysis, making them harder to crack. It was Babbage who cracked these in the early 19th century.

The toughest challenge with these is getting the center holes really, really, really accurate. I wasn't, and as a result the sections don't stay well aligned as you turn the inner ring. It's not bad, but I want to do better (I will need better drill bits too, with less wobble). I did create a template to stick down when lettering - even that is no easy to feat to align perfectly. My wife did the wood burning - we both think these would look even better engraved (so I'm now looking at engravers). Oak wasn't the best choice for burning, but these were some scraps I had around that needed using up.

I went with a high gloss finish as I thought it helped make the lettering pop out better.

I'm quite happy. And this is a design I want to incorporate into other pieces so these were good learning.

Re: Cipher Wheels are ready

#2

Re: Cipher Wheels are ready

John McGaw

Neat project. Never would have thought of it myself. As for the lettering, have you considered laser etching? It provides a lot of flexibility and superb accuracy. In fact, it would be possible for someone with the right machine to make super-accurate holes for you too.

Re: Cipher Wheels are ready

#3

Re: Cipher Wheels are ready

Stephen Kirk

Yeah, I had thought of that along with CNC. Lot of good options out there. I'd love to have my own desktop CNC.